How To Use LG Flash Tool To Flash LG KDZ ROM

پست های پیشنهاد شده

LG Flash tool is basically used to perform a factory reset or to install KDZ or TOT stock firmware on OEM-branded LG smartphones. This tool is now paired with restoring LG smartphone while sending an error report using an application which installed systematically or manually in your device operating system. On the other hand, the LG flash tool is capable of flashing KDZ files larger than 1 GB in size. Compatible with all most all the LG smartphones. LG flash tool 2018 was introduced recently with minimum errors and bugs. 

LG Flash Tool Highlighted Features

Enhanced GUI
LG flash tool is a featured app which can perform alonely. So a user is completely free to use this flash application with or without the use of LG support application.  Also, it requires few steps to flash KDZ or TOT firmware into an LG smartphone. 

Latest LG flash tool is modified with UptestEX So all most all the LG devices are compatible with the tool. 
No need of using Host files
Latest LG flash tool does not require an outside HTTP server or related host files to bypass any single step of the process.  An active internet connection requires only to download the tool and not for the installation. 

Pre Requirements
LG Flash Tool Latest version
Windows PC
Megalock.dll file to replace in the file location and ADB and fastboot driver installation requires.
Suggest installing latest
USB drives in your PC.
Pick a compatible USB cable 

How To Flash Tool To Flash LG KDZ ROM 
Step 1: Install the latest USB drivers in your windows PC.
Step 2:  Download the compressed zip file from  and execute it in your PC.
Step 3: Download your LG smartphone into the
download mode. The key combination may vary from one device to another. So google search to identify the exact key combination for your device. 
Step 4: Connect your smartphone to the PC.
Step 5: Click on the select KDZ and load the downloaded KDZ files.
Step 6: Now click on the start button and fill other details as required and click next in order to continue the flashing process.
Step 7: Remember not to operate your device until the process completed. It will notify once the process is completed. 

How To Flash Stock firmware Using LGUP 
Step 1: Turn off your smartphone. Close the application.
Step 2: Boot your LG into Download mode.
Step 3: Launch LG flash tool in your Windows PC in order to use "Board DL"  and load TOT or KDZ firmware. 
Step 4: Now you have to start flashing using board DL option. 

به اشتراک گذاری این ارسال

لینک به ارسال

به گفتگو بپیوندید

هم اکنون می توانید مطلب خود را ارسال نمایید و بعداً ثبت نام کنید. اگر حساب کاربری دارید، برای ارسال با حساب کاربری خود اکنون وارد شوید .

ارسال پاسخ به این موضوع ...

×   شما در حال چسباندن محتوایی با قالب بندی هستید.   بازگردانی قالب بندی

  تنها استفاده از 75 اموجی مجاز می باشد.

×   لینک شما به صورت اتوماتیک جای گذاری شد.   نمایش به صورت لینک

×   محتوای قبلی شما بازگردانی شد.   پاک کردن محتوای ویرایشگر

×   شما مستقیما نمی توانید تصویر خود را قرار دهید. یا آن را اینجا بارگذاری کنید یا از یک URL قرار دهید.