درج سییم g7102

[eza68 15]

سلام خدمت دوستان گوشی فوق سیم یک وسیم دو هیچ کدوم سیم کارت را نمیشناسه علت مشکل هم خود به خود بوده

[tandisgonbad 12]

از این استفاده کنید

[ARA6 27]

سلام

سریال سالمه؟

اگه آره یه فلش بزنید...

[eza68 15]

با تشکر الان سریال گوشی را چک کردم null شده احتمالا مشکل از این قسمت هست

[e30-851 29]

سلام دوست عزیز مشکل دقیقا همیه با باکس z3x و یا spt اقدام به ترمیم کنید فایلش qcn & cert داخل انجمن موجوده یا علی

[eza68 15]

واسه ترمیم سریال با این ارور روبرو میشم

[e30-851 29]

درود دوست عزیز عکستون برا من که قابل نمیش نیست دوستان ک نمیدونم زحمتی نیست لاگ کپی کن.یاعلی

[eza68 15]

این لینکو چک کنید در ضمن وقتی *#9090# را میزنم گزینه خاصی نمیاد که انتخاب کنم ممنون میشم راهنمایی کنید

http://uupload.ir/files/vx26_untitled.png

[eza68 15]

REPAIR INSTRUCTIONS:

 

Repair IMEI/Serial/BT/WiFi/Product Code:

1. Power on the phone.

2. Type *#0808# and select 'DM+MODEM+ADB'.

3. Reboot phone.

4. Connect USB cable, install drivers if needed.

5. Select Samsung diagnostic port in port settings.

6. Press 'Reset MSL' button to deactivate security.

7. Wait till phone reboot.

8. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',

go to 'Settings'-'Developer options' and enable 'USB debugging'.

9. Fill values what you need to repair.

10. Press 'Repair' button.

 

Reset EFS, Disable Factory Mode:

Phone must be rooted!

If the software can't root the phone automatically,

then you must root your device manually.

1. Power on the phone.

2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',

go to 'Settings'-'Developer options' and enable 'USB debugging'.

3. Connect the phone to PC with USB cable, install drivers if needed.

4. Press 'Reset EFS' if you need to reset it.

Be carefully, do not perform this without necessity. Backup will be created automatically.

5. If you have yellow table on your device screen, then press 'Disable Factory Mode' button.

 

Wipe EFS/NVM:

If you have 'IMEI null/null' or 'Phone baseband unknown' errors,

Then you can try to repair this errors with this function.

Phone must be rooted!

If the software can't root the phone automatically,

then you must root your device manually.

1. Power on the phone.

2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',

go to 'Settings'-'Developer options' and enable 'USB debugging'.

3. To use 'Auto backup/restore QCN' function (recommended):

Type *#0808# and select 'DM+MODEM+ADB'.

Type *#9090# and select 'DM/DUN over HSIC'.

Or you can disable this function and use ADB only.

4. Connect the phone to PC with USB cable, install drivers if needed.

5. Choose diagnostic port in port settings if 'Auto backup/restore QCN' is not skipped.

6. Press 'Wipe EFS/NVM' button.

 

Operation: Wipe EFS/NVM

Selected model: SM-G7102

Selected port: COM1 Communications Port,

Software version: 20.5

 

Waiting ADB device... OK

Reading phone info...

Model: SM-G7102

Android version: 4.4.2

Product code:

Phone version:

PDA version: G7102XXUBOC1

CSC version:

CSC country code: Kenya

CSC sales code: AFR

HW version:

Phone S/N:

Modem board:

RF cal date:

IMEI:

Checking Super user right... true

Backuping MMCBLK... OK

Reading ID... error

No answer from phone

 

Done with Samsung Tool v.20.5

[G.S.M 14]

REPAIR INSTRUCTIONS:

 

Repair IMEI/Serial/BT/WiFi/Product Code:

1. Power on the phone.

2. Type *#0808# and select 'DM+MODEM+ADB'.

3. Reboot phone.

4. Connect USB cable, install drivers if needed.

5. Select Samsung diagnostic port in port settings.

6. Press 'Reset MSL' button to deactivate security.

7. Wait till phone reboot.

8. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',

go to 'Settings'-'Developer options' and enable 'USB debugging'.

9. Fill values what you need to repair.

10. Press 'Repair' button.

 

Reset EFS, Disable Factory Mode:

Phone must be rooted!

If the software can't root the phone automatically,

then you must root your device manually.

1. Power on the phone.

2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',

go to 'Settings'-'Developer options' and enable 'USB debugging'.

3. Connect the phone to PC with USB cable, install drivers if needed.

4. Press 'Reset EFS' if you need to reset it.

Be carefully, do not perform this without necessity. Backup will be created automatically.

5. If you have yellow table on your device screen, then press 'Disable Factory Mode' button.

 

Wipe EFS/NVM:

If you have 'IMEI null/null' or 'Phone baseband unknown' errors,

Then you can try to repair this errors with this function.

Phone must be rooted!

If the software can't root the phone automatically,

then you must root your device manually.

1. Power on the phone.

2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',

go to 'Settings'-'Developer options' and enable 'USB debugging'.

3. To use 'Auto backup/restore QCN' function (recommended):

Type *#0808# and select 'DM+MODEM+ADB'.

Type *#9090# and select 'DM/DUN over HSIC'.

Or you can disable this function and use ADB only.

4. Connect the phone to PC with USB cable, install drivers if needed.

5. Choose diagnostic port in port settings if 'Auto backup/restore QCN' is not skipped.

6. Press 'Wipe EFS/NVM' button.

 

Operation: Wipe EFS/NVM

Selected model: SM-G7102

Selected port: COM1 Communications Port,

Software version: 20.5

 

Waiting ADB device... OK

Reading phone info...

Model: SM-G7102

Android version: 4.4.2

Product code:

Phone version:

PDA version: G7102XXUBOC1

CSC version:

CSC country code: Kenya

CSC sales code: AFR

HW version:

Phone S/N:

Modem board:

RF cal date:

IMEI:

Checking Super user right... true

Backuping MMCBLK... OK

Reading ID... error

No answer from phone

 

Done with Samsung Tool v.20.5

 

سلام دوست عزيز ابتدا سريال رو تبديل به 4900 كنيدبعد گوشي را روت كنيد سپس ترميم سريال بزنيد