تمامی خطا های نرم افزار Sp-Flashtool

[MR.Ali 49]

سلام

تمامی ارور های این نرم افزار ... دوستان مطالب به زبان ساده انگلیسی هست ... اگه دوستان تجربه ای داره برای بقیه ارائه بده تا بقیه هم استفاده ببرند

 

 

(1003) S_COM_PORT_OPEN_FAIL

 

Indicates a problem with the ports.

May occur if for example you have disabled com ports in the BIOS (at least in this case, com-port is virtual and the physical USB, but if you disable you just do not see the device on which you need to install preloader driver).

it could also be a problem with the USB cable (it helps to change the cable).

or a problem with the USB-port on your computer. try another port. dont use ports on front panel !!!

 

(1011) S_NOT_ENOUCH_STORAGE_SPACE

 

Occurs when the size of any part of the firmware is larger than the allocated space .

It may help to change the flashtool. This error pops up on different versions too. But mostly its a wrong rom

 

(1013) S_COM_PORT_OPEN_FAIL

 

Similar to 1003 (com port error) Check out solutions for 1003, and if they dont work , try changing to flashtool v 5.1

 

(1022) S_UNSUPPORTED_VER_OF_DA

 

If this pops up, you need to switch to a newer SP-flashtool version

(1040) S_UNSUPPORTED_OPERATION

 

Usually this relates to a wrong scatter. You cant use a 6577 scatter for a 6575 phone !

 

(2005) S_BROM_CMD_STARTCMD_FAIL

 

When you flash preloader and you get this, be sure to connect the phone in META mode (press volume down while connecting and hold) Otherwise while flashing the preloader this error can pop up.

When selecting ReadBack, Format or MemoryTest and you get this. It is necessary to connect the phone mode BOOTROM.

 

(3001) S_DA_EXT_RAM_ERROR

 

Perhaps a problem with the connection. Check the cable and / or reconnect the cable to another port.

(3013) S_DS_SOC_CHECK_FAIL

 

Its possible that you got a wrong uboot. The uboot makes sure the operating system loader + drivers initialize the main equipment (display , CPU, GPIO )

Or when in the line of the path is the folder names such as : C: \ Users \ Username \ Desktop \ Firmware Phone \ MIUIV10 \ MIUIV10

 

(3144) S_DA_EMMC_FLASH_NOT_FOUND

 

Maybe wrong scatter. For example, in the name of the scatter you got emmc, and the phone is actually a MTD flash.

 

MTD : Memory Technology Device – Wikipedia

EMMC What is eMMC | Datalight

 

(3066) S_DA_HANDSET_FAT_INFO_NOT_FOUND

Occurs when you are automatic formatting the phone, you should try to set the address of the regions you want to format manually.

 

S_DA_INVALID_RANGE (3036)

 

found this online :

 

The problem is that the SP Flash Tool before flashing PMT unit compares the address on the flash device with the scatter file and finds the difference, and why an error. PMT block is dynamically generated program SP Flash Tool from the scatter file. To delete / overwrite PMT block of a new scatter file, you must first delete it in the device that you want to flash. To do this, the program SP Flash Tool click on the "Format" (in the window that opens, change nothing, just press OK), then click "Download" and SP Flash Tool will write again to flash new data on the PMT block and other too.

 

(4001) S_FT_DA_NO_RESPONSE

 

Change USB-port and transfer SP Flash Tool in the root of your main harddrive ( C: )

Also there is maybe no info in the file download agenton the CPU / flash. Solution - upgrade.

The problem could also be hardware, such as broken flash memory.

 

(4008) S_FT_DOWNLOAD_FAIL

 

Change version of SP-flashtool ( older version does the job mostly !)

Change cable.

Battery Solution: charge the phone and try the flash process again.

 

(4009) S_FT_READBACK_FAIL

 

Either do not have space for a file or file can not be overwritten because it is locked.

try to make space on your phone and try external sd. Make sure permissions are ok.

 

(4032) S_FT_ENABLE_DRAM_FAIL

 

4032 an error occurred while trying to change the firmware and the firmware is not correct. You can try a different Sp-flashtool version (downgrade if you use v 5 ) or try a different rom or maybe format and flash again. only do this when you got the 100% correct rom.

 

(4050) S_FT_NEED_DOWNLOAD_ALL_FAIL

 

Do not match the size of the blocks in the PMT and scatter. To be found in the log line BROM_DLL

 

Quote:

size changed from 0x

 

Often

 

Partition 13 (USRDATA) size changed from 0x0000000000000000 to 0x000000000B620000

To solve this USRDATA can be renamed to in __NODL_USRDATA ... but there may be an 8038 error due to the difference in names .

 

In general, this error is treated downloading all the blocks, then the size of a PMT should switch to the right.

(5002) S_INVALID_DA_FILE

 

When using SP_Flash_Tool download should be selected. Also a different Sp-flashtool version can fix it.

 

(5054) S_DL_GET_DRAM_SETTINGS_FAIL

 

Not really sure what causes it. Sometimes after a full format you cant install new firmware. Solved problem by removing entire drivers and clean reinstallation

 

(5066) S_DL_PC_BL_INVALID_GFH_FILE_INFOR

 

Wrong files. For example, when chosen scatter from folders not yet prepared for Flashtool files. It is necessary to choose the scatter of the folder prepared for FT files. You can prepare your files with MTK droid tools !!! (backup!)

 

(6124) S_SECURITY_INVALID_PROJECT, MSP ERROE CODE: 0x00

 

The problem was solved as follows: Options -> DA Download All -> Speed ​​-> Full Speed ​​(with select High Speed ​​on my computer appears this specific error)

 

and by the way the method has worked for error 1013

 

(8038) SP FLASH TOOL ERROR

 

Occurs if the names or addresses of the blocks in the scatter differ from the table inside the phone (PMT). We must look SP_FLASH_TOOL.log and seek in it a string NOT MATCH

 

Quote:

NandLayoutParameter :: CompareIsNandLayoutMatched (): NOT MATCH: load item key (

Example2

), value (0x3444000), target item key (

Example1

), value (0x3444000)

in this example, it is necessary to replace the name of the scatter EXAMPLE2 on EXAMPLE. If a few differences, this error will occur until the scatter will not be identical to the PMT. You can just fix it, if we compare the tables that are in the log just above the line NOT MATCH. The first of the scatter, the second of the PMT number. It is necessary that all the names of the blocks in the scatter are the same as in the second table.

 

 

(8045) SP FLASH TOOL ERROR

 

The nature of the error is similar to 8038, but in practice editing a scatter file did not help. To solve this problem, many went to the service center and they fixed the device with an hardwareprogrammer.

Very few people fixed it by using DOWNLOAD button with all the other checkboxes.

 

(8200) SP FLASH TOOL ERROR

 

Occurs if you try to flash the device with firmware from another SoC Phone (eg you have mt6592, and you try to flash the firmware of the device on mt6582, etc.)

Also changing the flashtool version may help !

[MR.Ali 49]

سلام

 

این تقریبا نکات بیشتری رو گفته یعنی کامل تر توضیح داده =))

 

Flashtools errors and their solutions!

(1002) S_INVALID_ARGUMENTS

 

Invalid scatter file.

(1003) S_COM_PORT_OPEN_FAIL

 

 

 

The problem with the port.

May occur for example if you are disabled in the BIOS com-ports (though in this case the com-port is a virtual and a physical USB, but when you turn off you just do not see the equipment that puts drivers on the preloader).

or a problem in the USB cable (cable helps change the firmware).

any problem in PC USB-port (port helps change).

(1011) S_NOT_ENOUCH_STORAGE_SPACE

 

 

 

Occurs when the size of any part of the firmware is larger than the allotted space (usually a block or core rekaveri). Decision.

We also learned that this error sometimes occurs on the "raw" versions flashtool, so you might help change the version flashers.

 

(1013) S_COM_PORT_OPEN_FAIL

 

Error in nature and orientation similar to error 1003. Solutions must be sought on the same principle (see. 1003).

Can also help to change the version flashers.

(1022) S_UNSUPPORTED_VER_OF_DA

 

 

 

You need to use a newer version of SP FlashTool.

(1040) S_UNSUPPORTED_OPERATION

 

 

 

Scatter file does not fit the phone. For example, in 6577 the title is present, and the phone is actually 6573

(2005) S_BROM_CMD_STARTCMD_FAIL

 

 

 

On phones with MTD flash if an error occurs:

When you select Download to block preloader or dsp_bl not set daw. You should use the appropriate version SPFT, such v2.xxx for phones MT6573, or off DA Download All.

When you select Download to block preloader or dsp_bl set daw. It is necessary to uncheck these blocks! If these blocks need to flash, it is necessary to connect the phone to BOOTROM.

When selecting ReadBack, Format, or MemoryTest. It is necessary to connect the phone to BOOTROM.

 

(2020) S_BROM_CHKSUM16_MEM_RESULT_DIFF

 

 

 

In the settings Flashtool forced to put a checkbox that the body without the battery and then connect through the test point with the battery.

(2035) S_BROM_CMD_JUMP_DA_FAIL

 

 

 

After you click download, try connecting to the computer off device with pre-tensioned volume buttons.

 

(3001) S_DA_EXT_RAM_ERROR

 

 

 

Possible connection problems. Check the cable and / or reconnect the cable to another port.

 

(3012) NAND_FLASH_NOT_FOUND

 

 

 

Problems associated with the definition of a flash memory device. Known methods to overcome this problem:

Try using a different version of flashers, because as the release of different versions and updated information about the flash memory.

Try to flash a smartphone on another computer, unnecessarily. are soft karaoke problems hampering correctly identify the memory on a particular machine.

 

(3013) S_DS_SOC_CHECK_FAIL

 

 

 

It is possible that in the SP_Flash_Tool not worth birdie on uboot. uboot - the operating system loader + drivers to initialize the basic equipment (screen, processor, GPIO).

Or when there is a line path Russian folder names such as: C: \ Users \ Kolyan \ Desktop \ Hata \ Firmware \ Firmware tablet \ 8.31 \ Surfer 8.31 3G_20130402_V1.03 \ Surfer 8.31 3G_20130402_V1.03

 

(3066) S_DA_HANDSET_FAT_INFO_NOT_FOUND

 

 

 

Occurs when an automatic formatting, you should try to set the addresses manually formatting.

 

(3144) S_DA_EMMC_FLASH_NOT_FOUND

 

 

 

Besides problems with iron can be Scatter when the file is not the phone. For example in the title is present emmc, and the phone is actually a MTD flash.

As well there is a chance that the problem will be solved if you use the machine with another operating system (in priority winXP) and completely install the drivers.

 

(3149) S_DA_SDMMC_WRITE_FAILED

 

 

 

mcking230 writes pierced version 3.1320.0.174, after the loss errors listened to the program and flashed version 5.1420.00 (At the time of writing, the latest version) choose Format all + download and it worked, the program was at the root of drive C.

 

(4001) S_FT_DA_NO_RESPONSE

 

 

 

Solution - Change USB-port and transfer the SP Flash Tool to the root of the C: drive

Also there is an option in the file download agent no information about the CPU / flash. Solution - upgrade flashers.

The problem could be hardware, such as the failed flash memory.

 

(4008) S_FT_DOWNLOAD_FAIL

 

 

 

Methods of practices that have solved this problem:

Change version flashers and most interesting is that in the older version.

Change the cable for firmware.

It is also possible in the process of flashing the village battery ... Solution: charge your phone and try the firmware again.

 

(4009) S_FT_READBACK_FAIL

 

In addition to reading errors in the phone the same error for errors in the file system PC. Eg not enough space for a file or file can not be overwritten because it is locked. To clarify the log should look.

 

(4032) S_FT_ENABLE_DRAM_FAIL

 

 

 

4032 an error occurred while trying to change the firmware on the device to the processor through the program MT6589 Sp_Flash_tool. The unit has recovered by formatting the phone via the button Format (do not do it if you have the machine on the CPU MT6575 or 6577) in the program sp_flash_tool, then download the official firmware and flashed it with all ticks through the button download. Sometimes you need to uninstall and reinstall the drivers and re-do the formatting, and then reflash if the previous attempt was unsuccessful.

Also check whether there is a way to scatter-file Russian characters, as well as in the directory where the folder with the program.

If all else fails, try to change the version of the flasher. It is recommended to start with a version 5.1352.01

 

(4050) S_FT_NEED_DOWNLOAD_ALL_FAIL

 

 

 

Occurs when block sizes are not the same in the PMT and scatter. In general, this error is treated to download all the blocks (one can usrdata enough), then the size in the PMT should switch to the right. Sometimes it helps to change the version flashers.

 

(5002) S_INVALID_DA_FILE

 

When configuring SP_Flash_Tool download agent should be selected is attached to this release flasher. The choice of other agents gives this error.

 

(5054) S_DL_GET_DRAM_SETTINGS_FAIL

 

 

 

Did a hard reset via fleshtul and now cant install the new firmware. Reset do Yeshe time too fails, crashes the same error. Problem was solved by resetting in the new drivers.

 

 

(5066) S_DL_PC_BL_INVALID_GFH_FILE_INFOR

 

 

 

Wrong files. For example when the scatter of the chosen folder is not yet prepared for the FT files. It is necessary to choose the scatter in the folder prepared for FT files.

 

(6124) S_SECURITY_INVALID_PROJECT (6124), MSP ERROE CODE: 0 x 00.

 

 

 

Get eliminated after flashing through native Preloader button download. After this, the modified firmware recovery took place without errors and then restore the firmware from a previously created backup.

 

(8038) SP FLASH TOOL ERROR) / (PMT changed for the ROM; it must be downloaded

 

 

 

Occurs if the names or addresses of the blocks in the scatter differ from the table inside the phone (PMT). Should be corrected scatter-file in the firmware, ie lead to the same kind with your current scatter file of the firmware that you are currently on the unit. An example of how to catch and edit manually given here.

If a scatter file with nothing had been done, but it's still displays this error, you can try to change the version of the flasher. It is recommended to start with a version SP Flash Tool v5.1352.01

Also there is a modified version of fleshtula that ignores this error and enables ask. But be careful! Not all devices Attached fayl SP Flash Tool v5.1352.01 read this thread why Xiaomi MIUI Official Forum

Original theme using a modified version

Another way (not always work, because droidtuls not always creates a second scatter corrected sections):

Download the latest mtkdroidtools

Connect your phone and save the block map (stored 2 files and one of them will be named PMP)

Leave only PMP and rename it to normal view scatter

Through it you can flash any firmware without error 8038

 

(8045) SP FLASH TOOL ERROR

 

 

 

The nature of the error is similar to 8038, but in practice a scatter correction files do not help. To solve this problem, many went to the service center and they raised the unit via programmer.

At home, sometimes works firmware version through the DOWNLOAD button with all the other checkboxes (version fleshtula touch and try on several occasions).

 

(8200) SP FLASH TOOL ERROR

 

 

 

Occurs if you try to flash the device on the same platform, firmware from another (eg you mt6577, and you try to flash the firmware of the device on mt6575, etc.)

Can also help to change the version flashers.