آخرین اخبار و آپدیتهای باکس medusa در این تاپیک

[sfri.arash 121]

Medusa Box v.2.5.3 is out!

 

We have added Boot Repair via USB and small TP for LG VS930 and LG F160L

and via JTAG for TeXet TM-3200R, Crius Q7A and Huawei G520-0000!

 

Medusa Box v.2.5.3 Release Notes:

 

- Added support for the following models:

 

• LG VS930 - added Dead Boot Repair via USB
  
• LG F160L - added Dead Boot Repair via USB
  
• TeXet TM-3200R - Dead Boot / Device Repair via JTAG (thanks to mr. Drunya_L)
  
• Crius Q7A - Dead Boot / Device Repair via JTAG (thanks to mr. DZ_Developer)
  
• Huawei G520-0000 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)
  

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

 

To repair LG VS930 and LG F160L via USB, please follow the three next steps:

 

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
   
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
   
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
   

 

 

Download Medusa Box v.2.5.3

[sedigh.918 11]

Medusa Box v.2.5.7 is out!

---

Medusa Box v.2.5.7 is out!

 

We have added Boot Repair via USB and small TP for LG E970, LG H220 and via JTAG for Huawei G525-U00, HTC One M7 (PN07110)!

 

Medusa Box v.2.5.7 Release Notes:

- Added support for the following models:

[*=left]
LG E970
- added Dead Boot Repair via USB

[*=left]
LG H220
- added Dead Boot Repair via USB

[*=left]
Huawei G525-U00
- added Dead Boot / Device Repair via JTAG

[*=left]
HTC One M7 (PN07110)
- added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

 

To repair LG E970 and LG H220 via USB, please follow the three next steps:

[*=left]Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port


(do NOT use any USB hubs!)

[*=left]
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.


Drivers are in {Installation_Folder}\Driver\QHSUSB

[*=left]
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

 

 

 

 

 

 

Medusa - Ultimate Breakthrough in the Phone Repair!

 

 

Download Medusa Box v.2.5.7