رفتن به مطلب
انجمن توسعه دهندگان موبایل

نسخه جدید CM2MT2 R.4 منتشر شد


ارسال های توصیه شده

== CM2MT2 v2.00 r2 ==
MT6739 support, SPUnlock and more!

- Main
MT6739 CPU supported!
MT6739 moved from TEST to GENERAL support.
Firmwware read 
Firmware write
NVRAM read
NVRAM write
Reset Settings / Format FS
Reset FRP 
Reset Privacy
MemoryTool 

- MemoryTool 
Fixed PMT init on some devices 
Optimized Expand/Collapse view functions
Fixed DA1804 and DA1712 loaders support for WIPE
Optimized NAND support 

- Service
NVRAM module updated 
.dynamic page detection 
.some types support fixed
.repair security ( security type detection ) updated
FormatFS / Reset settings rebuild
.Activated fully automatic "FULL FACTORY" mode, designed for all modern devices ( include devices with SEC_CONTROL )
."FULL FACTORY" mode set to default
.Some "OLD" agents (DA15xx) may not work

- SP Unlock activated
Support all MTK modern phones, except MT6763 and MT6739. 
Read codes and Direct Unlock mode supported
MT6570 eMMC ONLY devices supported 

- Core 
Fixed memory leak issues and problems with booting on some systems
Optimized different OLD agents support for MODERN devices ( DA16xx and DA17xx line )
SW more faster now
EMI handler for MT6570 and MT6797 fully automated and complete
Improved EMI lookup support for MT675x devices
EMIDB updated
Hint/Error explain module updated
MT6758 support under test
MT6771 support under test

- Flasher
Fixed break issue, when just one file selected for flashing.
HWInfo compatibility status shown in log in both cases ( succes o failed ) 
- FW reader
MT6739 support
New types of firmwares supported
Optimized NAND reading on DA18xx line loaders
Read Firmware size now shown in log
- New models included
Limited MEIZU support
Limited Oppo support
Limited Gionee support
Limited BQ support
Some basic "generic" secure devices support optimized
Known issues/warnings/info : 
1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all. 
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format! 
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-Write data, which you want, ignore "EMPTY" states. 
4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
 

لینک ارسال
در 2 ساعت قبل، mahdi2050 گفته است :

استاد این نسخه قابلیت رید پترن و reset password  نداره درسته؟؟

من چک کردم نتونستم پیدا کنم.

درود این نسخه فقط برای گوشی های secure هست و هنوز قابلیت read/reset رو پشتیبانی نمیکنه

لینک ارسال
== CM2MT2 v2.00 r4 ==
Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features !
 
- Main 
 Connection level revised
 BROM level support optimized
 
 MT6771 CPU supported!
 MT6771 moved from TEST to GENERAL support.
 Firmwware read
 Firmware write
 NVRAM read
 NVRAM write
 Reset Settings / Format FS
 Reset FRP
 Reset Privacy
 MemoryTool
 
- Service
 Repair Security revised. Fixed issues with some NV types.
 
- Core   
  EMIDB updated
  Hint/Error explain module updated 
  MT6758 support under test 
  MT6765 support under test
 
- FW reader 
  MT6771 supported
  New types of firmwares supported
  Scatter creation optimized 
  
- SP Unlock
  Revised unlock support for some models
  Info : MT6739/MT6763/MT6771 NOT supported YET!
 
- New models included
  Limited Oppo support (F7/A3)
  Limited Vivo support 
  And diffirent other models
  Some other basic "generic" secure devices support optimized
 
Known issues/warnings/info :
 1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
 In result you will give read/write FW errors and rest problems at all.
 Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
 2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
 3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
 Read-Write data, which you want, ignore "EMPTY" states.
 4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
 5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
 6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
 7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
 8. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version!
 If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!!
 Preloader info shown now during FW load.

 

لینک ارسال
  • 5 ماه بعد...

بایگانی شده

این موضوع بایگانی و قفل شده و دیگر امکان ارسال پاسخ نیست.

×
×
  • اضافه کردن...