رفتن به مطلب
انجمن توسعه دهندگان موبایل

در خواست فایل فلش نوکیا c2-02


gebal

ارسال های توصیه شده

در 9 دقیقه قبل، gebal گفته است :

گوشی قفل داشت فلش کردم رو فایل image ارور داد حالا هر فایلی میزنم رو گزینه image ارو میده حالا گوشی رو تست مد موند

دوستان کسی فایل به این مشخصه نداره code 059d331

ورژن چند؟

لینک ارسال
در 10 دقیقه قبل، gebal گفته است :

گوشی قفل داشت فلش کردم رو فایل image ارور داد حالا هر فایلی میزنم رو گزینه image ارو میده حالا گوشی رو تست مد موند

دوستان کسی فایل به این مشخصه نداره code 059d331

اخرین ورژن

NOKIA C2-02 RM-692 V07.48 FARSI-OK.rar

لینک ارسال
در در 21 اسفند 1396 در 00:31، mehran72m گفته است :

Box VPP disabled
VPP Voltage    0.04v    PASSED
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Lumia No TP is NOT ACTIVATED! (1)
Avaiable Physical Memory: 1.629GB
Avaiable Virtual Memory: 1.815GB
Avaiable Pagefile: 3.1023GB
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing 857E3AC7_rm692__07.48.mcusw (XGold2)...
Checking 857E3AC7_rm692__07.48.mcusw...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_10.46_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00EC3012, Samsung, Size: 64MBytes
Processing "rm692__07.48.mcusw_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x40000000-0x4001FFFF...
Flashing at 0x40000000...
Flashed 131072 bytes OK
Erasing 0x40040000-0x4005FFFF...
Flashing at 0x40040000...
Flashed 131072 bytes OK
Erasing 0x40060000-0x4015FFFF...
Flashing at 0x40060000...
Flashed 1048576 bytes OK
Erasing 0x40280000-0x41DBFFFF...
Flashing at 0x40280000...
Flashed 28049408 bytes OK
Erasing 0x43E20000-0x43E5FFFF...
Processing 60D96A41_rm692__07.48.ppm_m_a (XGold2)...
Checking 60D96A41_rm692__07.48.ppm_m_a...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m_a.ppm_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x41DC0000-0x424BFFFF...
Flashing at 0x41DC0000...
Flashed 4257352 bytes OK
Processing 9CF07C49_rm692__07.48.image_m_a_059G5T2 (XGold2)...
Checking 9CF07C49_rm692__07.48.image_m_a_059G5T2...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m_a_059G5T2.image.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x424C0000-0x43E1FFFF...
Flashing at 0x424C0000...
Flashed 12976128 bytes OK
Erasing 0x43E60000-0x43F3FFFF...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia USB Flashing Generic]: Port opened OK!
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


باز ارو میده 

 

لینک ارسال
در 3 ساعت قبل، gebal گفته است :

Box VPP disabled
VPP Voltage    0.04v    PASSED
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Lumia No TP is NOT ACTIVATED! (1)
Avaiable Physical Memory: 1.629GB
Avaiable Virtual Memory: 1.815GB
Avaiable Pagefile: 3.1023GB
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing 857E3AC7_rm692__07.48.mcusw (XGold2)...
Checking 857E3AC7_rm692__07.48.mcusw...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_10.46_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00EC3012, Samsung, Size: 64MBytes
Processing "rm692__07.48.mcusw_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x40000000-0x4001FFFF...
Flashing at 0x40000000...
Flashed 131072 bytes OK
Erasing 0x40040000-0x4005FFFF...
Flashing at 0x40040000...
Flashed 131072 bytes OK
Erasing 0x40060000-0x4015FFFF...
Flashing at 0x40060000...
Flashed 1048576 bytes OK
Erasing 0x40280000-0x41DBFFFF...
Flashing at 0x40280000...
Flashed 28049408 bytes OK
Erasing 0x43E20000-0x43E5FFFF...
Processing 60D96A41_rm692__07.48.ppm_m_a (XGold2)...
Checking 60D96A41_rm692__07.48.ppm_m_a...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m_a.ppm_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x41DC0000-0x424BFFFF...
Flashing at 0x41DC0000...
Flashed 4257352 bytes OK
Processing 9CF07C49_rm692__07.48.image_m_a_059G5T2 (XGold2)...
Checking 9CF07C49_rm692__07.48.image_m_a_059G5T2...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m_a_059G5T2.image.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x424C0000-0x43E1FFFF...
Flashing at 0x424C0000...
Flashed 12976128 bytes OK
Erasing 0x43E60000-0x43F3FFFF...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia USB Flashing Generic]: Port opened OK!
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!


باز ارو میده 

 

atf-best داری

لینک ارسال
در 43 دقیقه قبل، gebal گفته است :

بله دارم تست کردم فرقی نداره

 

اخرین ورژن رو دانلود کن با best یا atf تیک factory reset رو بزن و فلشش کن

اگر مشکل درایور داشتی ادرس پوشه atf رو بده

لینک اخرین ورژن

لینک ارسال

بایگانی شده

این موضوع بایگانی و قفل شده و دیگر امکان ارسال پاسخ نیست.

×
×
  • اضافه کردن...