رفتن به مطلب
انجمن توسعه دهندگان موبایل

فلش/آنلاک و تعمیر موفقیت آمیز با باکس ولکانو

MR.Ali

توسط MR.Ali
در Volcano Box

ارسال های توصیه شده

  • پاسخ 57
  • ایجاد شد
  • آخرین پاسخ
MR.Ali

MR.Ali 49

ارسال شده در
  • مالک
ارسال شده در

حل مشکل روی آرم بودن چینی طرح سامسونگ با باکس ولکانو =))

4pHDz.png

 


After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM5 COM10 COM20
Current Port:COM5
Analysis of USB port,Please insert phone USB cable.
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),215m(system),165m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),1m(boot_logo0),3840k(productinfo),512k(kpanic),512k(simlock),10m(intmemory)
Please read the phone partition.
>>Set to Factory successfully.

>

format -6820.jpg

رفاقت کشکه و دوغ

لینک ارسال
MR.Ali

MR.Ali 49

ارسال شده در
  • مالک
ارسال شده در

فرمت و رید گوشی موفقیت آمیز گوشی چینی W520 طرح آیفون =))

 

مشکل هنگ روی آرم

 

 

 

>  After format or Flash you have to press & hold power button for at least 1.30 mins.
 Note for win7 users :
 Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
 After that the spd drivers will have the ability to be loaded.
 Available Ports:COM4 
 Current Port:COM4
 Analysis of USB port,Please insert phone USB cable.
 Connecting...
 CPU TYPE:MT6575
 Hardware version:CB00
 Software version:E201
 SecCfgVal :0x00000000
 BromVersion :0xFF
 BLVersion :0x01
 Boot downloading complete!
 FlashID:00AD00BC00900055
 Flash Type: NAND_H8BCS0UN0MCR          
 FlashLen:20000000
  
 Analysis of USB port...
   
   
 Analysis of system files...
 PRELOADER:  addr:0x000000 --length:0x040000
 DSP_BL:  addr:0x040000 --length:0x0C0000
 __NODL_NVRAM:  addr:0x100000 --length:0x300000
 __NODL_SECCFG:  addr:0x400000 --length:0x020000
 UBOOT:  addr:0x420000 --length:0x060000
 BOOTIMG:  addr:0x480000 --length:0x500000
 RECOVERY:  addr:0x980000 --length:0x500000
 SEC_RO:  addr:0xE80000 --length:0x120000
 __NODL_MISC:  addr:0xFA0000 --length:0x060000
 LOGO:  addr:0x1000000 --length:0x300000
 __NODL_EXPDB:  addr:0x1300000 --length:0x0A0000
 ANDROID:  addr:0x13A0000 --length:0x12700000
 __NODL_CACHE:  addr:0x13AA0000 --length:0x3C00000
 USRDATA:  addr:0x176A0000 --length:0x000000
  
  
 Format addr:0x176A0000 --Format length:0x7F20000
 Format range: Start Address: 0x176A0000,Format Length :0x7F20000
 Flash erasing complete!
 Analysis of USB port,Please insert phone USB cable.
 Connecting...
 CPU TYPE:MT6575
 Hardware version:CB00
 Software version:E201
 SecCfgVal :0x00000000
 BromVersion :0xFF
 BLVersion :0x01
 Boot downloading complete!
 FlashID:00AD00BC00900055
 Flash Type: NAND_H8BCS0UN0MCR          
 FlashLen:20000000
  
 Analysis of USB port...
 Flash reading complete!
>>Spend time 197.3 s

 

رفاقت کشکه و دوغ

لینک ارسال
MR.Ali

MR.Ali 49

ارسال شده در
  • مالک
ارسال شده در

GLX H4

(SPD 6610)

(jic-12C) =))

 

یه نکته بگم با نسخه 2.9.9 انجام نشد ولی با نسخه 2.5 به راحتی زدش ... هلو برو تو گلو :-;(

 



>>Available Ports:COM4 COM50
>>Current Port:COM4
>>Available Ports:COM4 COM50
>>Detection initiated...
>>Vcc: 10
>>Gnd: 1 4
>>Analyzing D+ and D-...
>>D+ = 9, D- = 8
>>Analyzing USB device, please wait...
>>Find USB device:SCI USB2Serial (COM36), (VID_1782&PID_4D00)
>>Internal version: Spreadtrum Boot Block version 2.0
>>Boot downloading...
>>Start boot please wait a moment....
>>Spreadtrum Boot Block version 1.2
>>CPU TYPE:SC6610/20 [66100000]
>>FLASH ID: 00C8006000170000
>>Flash Type:[GD] 25LG64bWL
>>Size:0x800000(8MB)
--------------------------------------.
>>Phone imei lists.
>>IMEI1:35502005******
>>IMEI2:3550200*****
>>IMEI3:3585700*****
>>Read Info finish.
>>Detection initiated...
>>Vcc: 10
>>Gnd: 1 4
>>Analyzing D+ and D-...
>>D+ = 9, D- = 8
2015-04-20 01:10:37 ق.ظ >>Analyzing USB device, please wait...
>>Find USB device:SCI USB2Serial (COM36), (VID_1782&PID_4D00)
>>Internal version: Spreadtrum Boot Block version 2.0
>>Boot downloading...
>>Start boot please wait a moment....
>>Spreadtrum Boot Block version 1.2
>>CPU TYPE:SC6610/20 [66100000]
>>FLASH ID: 00C8006000170000
>>Flash Type:[GD] 25LG64bWL
>>Size:0x800000(8MB)
>>Reading...(0)
>>The data has been saved in C:\Users\MR.Ali\Desktop\_20150420_011104_FullFlash.bin, size: 8 M.
>>Software has two ways to find password, it may have different results to click button again.
>>Failes to open the file!
>>Screen Lock input order:
>> ¢ظ ¢ع ¢غ
>> ¢ـ ¢ف ¢ق
>> ¢ك ¢à ¢ل
>>[phone lock]:123321
>>[privacy lock]:0000
>

رفاقت کشکه و دوغ

لینک ارسال

بایگانی شده

این موضوع بایگانی و قفل شده و دیگر امکان ارسال پاسخ نیست.

رفتن به فهرست موضوع ها
×
×
  • اضافه کردن...