To use this software Smart-Card firmware version should be 0137 or higher.

Base:
Base - Secure boot - Automatic boot selection feature released
Base - Secure boot: Allow automatic detect boot configuration for SECURE enabled chips
Base - Secure boot: Following secure configurations are supported: SBC, SLA, SDA and their combinations
Base - Secure boot: Following secure configurations are NOT supported: ARB and combinations with it
Base - Secure boot: Supported CPU: MT6572, MT6580, MT6582, MT6589, MT6592, MT6735, MT6752, MT6753, MT6755, MT6757, MT6763, MT6771, MT8127, MT8135, MT8167 ( list of tested )

Base - ModelBD - Manual Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use

Base - ModelBD - Automatic Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use ( press and hold LCTRL key during press IDENTIFY )

Base - FlashLoader line v1904 tested and supported. Older lines (6592/6595 and similar) still unstable
Base - FlashLoader line v1912 tested and supported. Older lines (6592/6595 and similar) still unstable

FWFlasher:
FWFlasher - Flash core updated
FWFlasher - SecureFlash on Legacy phones revised
FWFlasher - MT6771/6765 support revised

FWReader:
FWReader - More types supported for safe read
FWReader - Info reading improved
FWReader - packing revised
FWReader - more accurate data verification

Service:
Service - Format FS revised
Service - NVRAM module updated

Platform:
Platform - MT6765/MT6762 support optimized

Loaders:
LoaderDB - Lot of new agents included (Tecno, Tesla, Wiko and other)
LoaderDB - Included MT6570 "DRAM Fixed" agents used to revive devices flashed with wrong preloader ( so called "Doogee X10 bug" )

Other:
Other - Many different small changes and fixes
Other - SaveUser Configuration option can be found in FILE system menu. Work only in MANUAL mode !
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - Preloader tools, Preloader init and other related stuff updated
Other - Partial LEGACY NAND support - optimized boot. Identify work complete if BMT autoset work correct

Info: Automatic Boot option can be switched off/on in settings menu
Info: Automatic Boot work in "SelfLearning" mode - once learned it will boot this type/device line after automatically
Info: Automatic Boot option support and learn different modes ! Make sure if device used DIFFERENT settings - learn all of them !
Info: MT6570 Fixed NAND DA can be used for flashing FACTORY firmware and INIT PRELOADER. For FW read and all other things - use INFINITY ones !

نقل قول

How to use AutomaticBoot select, User DB, Auto DB

Download link #1

واکنش ها : sajadgeekit

نقل قول

دنیا همه هیچ و اهل دنیا هم هیچ

ای هیچ برای هیچ

برهم مپیچ

به اشتراک گذاری این ارسال

لینک به ارسال

rezasitebox 36

ارسال شده در آذر 7، 2019

در در 15 شهریور 1398 در 18:02، Alireza_Shahrokhi گفته است :

Infinity Chinese Miracle-2 MTK/Mediatek v2.06


To use this software Smart-Card firmware version should be 0137 or higher.

Base:
Base - Secure boot - Automatic boot selection feature released
Base - Secure boot: Allow automatic detect boot configuration for SECURE enabled chips
Base - Secure boot: Following secure configurations are supported: SBC, SLA, SDA and their combinations
Base - Secure boot: Following secure configurations are NOT supported: ARB and combinations with it
Base - Secure boot: Supported CPU: MT6572, MT6580, MT6582, MT6589, MT6592, MT6735, MT6752, MT6753, MT6755, MT6757, MT6763, MT6771, MT8127, MT8135, MT8167 ( list of tested )

Base - ModelBD - Manual Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use

Base - ModelBD - Automatic Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use ( press and hold LCTRL key during press IDENTIFY )

Base - FlashLoader line v1904 tested and supported. Older lines (6592/6595 and similar) still unstable
Base - FlashLoader line v1912 tested and supported. Older lines (6592/6595 and similar) still unstable

FWFlasher:
FWFlasher - Flash core updated
FWFlasher - SecureFlash on Legacy phones revised
FWFlasher - MT6771/6765 support revised

FWReader:
FWReader - More types supported for safe read
FWReader - Info reading improved
FWReader - packing revised
FWReader - more accurate data verification

Service:
Service - Format FS revised
Service - NVRAM module updated

Platform:
Platform - MT6765/MT6762 support optimized

Loaders:
LoaderDB - Lot of new agents included (Tecno, Tesla, Wiko and other)
LoaderDB - Included MT6570 "DRAM Fixed" agents used to revive devices flashed with wrong preloader ( so called "Doogee X10 bug" )

Other:
Other - Many different small changes and fixes
Other - SaveUser Configuration option can be found in FILE system menu. Work only in MANUAL mode !
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - Preloader tools, Preloader init and other related stuff updated
Other - Partial LEGACY NAND support - optimized boot. Identify work complete if BMT autoset work correct

Info: Automatic Boot option can be switched off/on in settings menu
Info: Automatic Boot work in "SelfLearning" mode - once learned it will boot this type/device line after automatically
Info: Automatic Boot option support and learn different modes ! Make sure if device used DIFFERENT settings - learn all of them !
Info: MT6570 Fixed NAND DA can be used for flashing FACTORY firmware and INIT PRELOADER. For FW read and all other things - use INFINITY ones !

سلام دوست عزیز من دارم این دانگل رو حدودا ۵ سال پیش خریدم

الان هرکاری میکنم نصب نمیشه