رفتن به مطلب
انجمن توسعه دهندگان موبایل

آخرین اخبار و بروزرسانی های Octoplus JTAG PRO


mohsinsomeone

ارسال های توصیه شده

120.png

 

Octoplus JTAG PRO Software v.1.1.5 is out!
 
We have added support for Samsung Galaxy Core Prime, Samsung Galaxy J1, Samsung Galaxy J1 Mini, Samsung Z1, Samsung Z3 Tizen and Samsung Galaxy Tab 4 8.0!
 
Octoplus Box JTAG PRO Software v.1.1.5 Release Notes:
 
?
Added support for the following models via eMMC:
 
  •  
    Samsung SM-G360T1
    - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  •  
    Samsung SM-J100H
    - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  •  
    Samsung SM-J105H
    - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  •  
    Samsung SM-Z130H
    - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  •  
    Samsung SM-Z300H
    - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  •  
    Samsung SM-T337T
    - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
 
?
Added
LG Factory Repair
via USB and JTAG interfaces ("*.tot", "*.kdz" and "*.dz" firmware versions are supported)
 
?
Added support for new type of KDZ firmware with "*.dz" files inside
 
?
All pinouts and repair procedures described in the manual ("Help" button in the Software)
 
 

29.png

 

 

 

 

Find out more at:

 

70.png

 

121.png122.png123.png124.png125.png126.png127.png128.png159.png

If you only do what you can do

you will never be more than you are now

لینک ارسال
  • 4 هفته بعد...

120.png

Octoplus JTAG PRO Software v.1.1.7 is out!

 

Resize/Repartition feature and ADB tool have been released!

 

Octoplus Box JTAG PRO Software v.1.1.7 Release Notes:

 

    [*]
    Released Resize/Repartition feature - possibility to resize/repartition eMMC flash with EFI partition table! One button click only!

    This new feature is important and should be used when you decide to replace your flash memory, use another chip with bigger or less flash memory size.

    Also, Resize/Repartition feature will come handy when you performed recovery operation and want the device to recognize the amount of available memory correctly.

    For example, you have a device with 16GB flash chip and corresponding restore file, created with the same device, with the same amount of memory – also 16GB.

    You changed the original flash chip on another flash chip with bigger capacity – 32GB and performed the restore operation, using recovery file (Repair File), which has been created on a similar device with 16GB flash memory size.

    As a result, after recovery operation, device will recognize 16GB only of new flash memory chip. To be able to access all 32GB on your new chip you have to perform Resize/Repartition operation!

    Note:
    Not all versions of firmware support repartition/resize operation.

     

    To perform Resize/Repartition do the following:

    - Connect device via eMMC

    - Go to

If you only do what you can do

you will never be more than you are now

لینک ارسال
  • 1 سال بعد...
Octoplus JTAG PRO v.1.5.5 is out! Added USB UFS support, support for Galaxy S8/S8+/Note 8 and more!

Added support for work with UFS flash chips via USB using USB Qualcomm UFS loaders!

Added support for Samsung SM-G930T, Samsung SM-G935V, Samsung SM-G950U, Samsung SM-G955U, Samsung SM-N950U, LG H870, Xiaomi Mi5S, Lenovo K53a48 via USB and support for LG H901, Motorola XT1642, Motorola XT1676, Samsung GT-I9301i, Sony F3112 via eMMC.

Added 15+ unique Qualcomm USB loaders (for work with eMMC and UFS flash) for devices of different vendors.

Uploaded new “Live logs” into the Support Area.

Some adjustments and improvements were made.

Octoplus JTAG PRO Software v.1.5.5 Release Notes:
? Added support for the following models via eMMC:
 
  • LG H901 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Motorola XT1642 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Motorola XT1676 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung GT-I9301i - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Sony F3112 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
? Added support for the following models via USB:
 
  • Lenovo K53a48 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG H870 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G930T - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G935V - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G950U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G955U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-N950U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Xiaomi Mi5S - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
? Added support for work with UFS flash chips via USB using USB Qualcomm UFS loaders:
 
  • Added USB Qualcomm UFS loaders to Software for the following vendors’ devices:
    - LG - for MSM8996
    - Samsung - for MSM8996 and MSM8998
    - Xiaomi - for MSM8953 and MSM8996
  • Added possibility to select external USB Qualcomm UFS loader! From now on you can select external USB Qualcomm UFS loader ("*.mbn", "*.bin", "*.elf") to connect the device with UFS chip via USB. This feature will be useful, if built-in USB Qualcomm UFS loaders are not compatible with your device, or necessary loader is not included in the Software.
    To select external USB Qualcomm UFS loader, do the following: select "USB" option in Software, select "Brand: Custom Settings", select "Device (Core): Custom Loader UFS” and press “Connect” button to select loader and connect the device. Don't forget to put the device into "Qualcomm...9008" mode before.
Read/Write/Full erase operations for each physical partition are supported with USB Qualcomm UFS loaders!

Note: When connecting the devices by using USB Qualcomm UFS loaders, “Factory Repair” operation is currently not supported and will be added in future Software updates.
? Added 10+ unique Qualcomm USB Loaders (eMMC) for different vendors' devices (Read/Write/Full erase operations are supported):
 
  • Asus - added loader for MSM8953
  • Moto - added loaders for MSM8953
  • Oppo - added loaders for MSM8953
  • Vivo - added loaders for MSM8953
  • Wik - added loaders for MSM8953
  • Yu - added loader for MSM8953
? Added general (common) Qualcomm USB loader for MSM8953.
? Improved eMMC erase operation for some Samsung eMMC flash chips (thanks to Mr. andrei_d1978).
? Fixed TP picture in Software for KMKJS000VM-B309 eMMC flash chip (thanks to Mr. Jenuk).
? Uploaded new “Live logs” into the Support Area.
? Some adjustments and improvements were made.
? All pinouts and Repair procedures are described in the manual ("Help" button in the software).
plus line
Find out more at: www.octoplusbox.com
 
لینک ارسال

بایگانی شده

این موضوع بایگانی و قفل شده و دیگر امکان ارسال پاسخ نیست.

×
×
  • اضافه کردن...