رفتن به مطلب
انجمن توسعه دهندگان موبایل

آنلاک نوکیا ۲۰۶ به وسیله باکسatf


mohsen1001

ارسال های توصیه شده

آنلاک نوکیا ۲۰۶

کابل fbus این مدل به صورت usb هست که میتونید به پورت های جلویی کامپیوترتون وصل کنید.

 

برنامه رو باز کنید مدل گوشی رو انتخاب کنید. گزینه bus chekرو بزنید .پیغامی مبنی بر اتصال کابل به گوشی در برنامه نمایش داده میشه حالا کایل رو به پشت گوشی وصل کنید تا از اتصال صحیح گوشی مطمن بشید.میتونید اینفو هم بگیریید و در پایان برای آنلاک گوشی گزینه مشخص شده در تصویر رو بزنید.

 

 

132.jpg

 

این هم لاگ مراحل کار

 

Booting Phone via USB...

 

 

======================================================

======================================================

USB Phone BUSCheck Boot

======================================================

======================================================

Then Perform Steps 1, 2, 3 and 4...

 

1. Remove USB and Battery...

2. Insert USB.

3. Insert Battery. (Some phones boot automatically)

4. Please Power on phone shortly...

 

 

Infineon USB Boot: F00A1FB300020303010100FF

Sending PBL...

PBL Successfully Sent...

Sending SBL...

SBL Successfully Sent...

Setting Transmission Speed Done...

Flash Chip Manufacturer: Samsung Electronics Corp.

Flash Boot Successful...

Unique Data: 0210001812173826

Original Product Code: 059Q8L6

Reading : CCC... OK!

Reading : HWC... OK!

Reading : NPC... OK!

RPL Backup was Successful...

Plain RPL saved to:

C:\AdvanceBox Turbo Flasher\Nokia\Backup\351717065115325\351717065115325_84958.rpl

Certificate Block Saved to:

C:\AdvanceBox Turbo Flasher\Nokia\Backup\351717065115325\351717065115325_CERTIFICATE_0863912E.bin

PM Block Saved to:

C:\AdvanceBox Turbo Flasher\Nokia\Backup\351717065115325\351717065115325_PMM_PROT_252F2377.bin

 

Security Code: 32123

 

Infineon USB Buscheck Done

Phone Restart Mode: TEST MODE

 

Process Done...

 

 

Scanning USB Ports...

 

================================================

Basic Phone Information

================================================

MCU Version: V 04.52 30-06-13 RM-872 © Nokia

IMEI Plain : 351717065115325

IMEI Spare : A351717065115320

IMEI SV : 33517170651153211F

IMEI (2nd) : 351717065115333

IMEI Spare : A351717065115330

IMEI SV : 33517170651153311F

Phone Model: K 206

Category : Entry

Phone Type : RM-872

 

================================================

Extended Phone Information

================================================

Product Serial Number: ED467EFBI

Product Code : 059Q8L6

Module Code : 0205283

Basic Production Code: 059P5C3

Long Production SN : 0

PPM SW Version : V 04.52 30-06-13 RM-872 © Nokia M2

BT MCM Version : 19b5-22012

MCU SW Version : V 04.52 30-06-13 RM-872 © Nokia

HW Version : 2300

RFIC Version : 68

LCD Version : TPO

Content Pack Version : Content: m2_059Q8L6 V 04.52 30-06-13 RM-872 © Nokia

Bluetooth ID : FC:92:3B:85:BB:BE

CS Type : GSM900, GSM1800

 

********** SIMLOCK INFO **********

CONFIG_DATA : 0010100000000000

PROFILE_BITS : 800000000004000B

ASIC : 11

PROVIDER : Default Test Operator

LOCK COUNTERS: KEYPRESS 0/3, FBUS 0/10

 

Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open

 

SIMLOCK_TYPE : PA_SIMLOC30 (20-digit NCK)

SIMLOCK_TEST : PASSED

SECURITY_TEST : PASSED

SECURITY_CODE : 32123

PHONE_MODE : TEST

 

================================================

Dynamic Camera Configuration

================================================

DCC ID : 01029704

DCC Ver: 008013

Status : OK

 

 

Make sure you have installed the

COMPLETE Flash Package for this Phone...

 

Goto "Settings" --> "Nokia Settings" and verify that

the Folder where you installed your Flash Files are

in the "PRODUCT PATH TO SCAN" List...

 

FACTORY SET TO : Full Factory Set

OK

FACTORY SET TO : User Data

OK

FACTORY SET TO : Leave Factory

OK

FACTORY SET TO : Service Center

OK

FACTORY SET TO : Software Upgrade

OK

FACTORY SET TO : Production Tune

OK

لینک ارسال

آنلاک نوکیا ۱۰۷

 

143.jpg

 

اینم لاگ:

 

 

 

VBATT Powering Up >>>>

SET VCCIO Level Done

SET BSI Load Done

 

Booting Phone...

VBATT Powering Down <<<<

VBATT Powering Up >>>>

SET VCCIO Level Done

SET BSI Load Done

 

Booting Phone...

CPU ID Response: A200341100

CPU Type: XG110 2.1B

Phone Booted after 2 attempts...

 

******************************************************

START INFINEON BUS CHECK

******************************************************

 

 

Sending PBL 37888 bytes...

PBL Successfully Sent...

Sending SBL 65024 bytes...

SBL Successfully Sent...

 

Flash Chip Manufacturer: Samsung Electronics Corp.

Flash Chip Type: K8S6415ETC 64 Mbit (4Mb x 16) NOR

Extended Information: Multiple Bank / Burst / 1.8v

 

******************************************************

INFINEON BUS CHECK DONE

******************************************************

 

 

MCU: V 02.90 22-10-13 RM-961 © Nokia

IMEI: 353034063718680

Product Serial Number: FB5A67FBI

Product Code : 059T2C0

Module Code : 0205726

Basic Production Code: 059S7H7

PPM SW Version : V 02.90 22-10-13 RM-961 © Nokia IJ

ADSP Version : p V 02.90\n22-10-13\nRM-961\n© NMP\nij

MCU SW Version : V 02.90 22-10-13 RM-961 © Nokia

HW Version : 2700

UEM Version : 1328

UPP Version : 8850

LCD Version : WIN:BOHAIv93 NT39121

********** SIMLOCK INFO **********

CONFIG_DATA : 0010100000000000

PROFILE_BITS : 0000000000040002

ASIC : 11

PROVIDER : Default Test Operator

 

Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open

Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open

ST_LCD_TEST : PASSED

 

 

Make sure you have installed the

COMPLETE Flash Package for this Phone...

 

Goto "Settings" --> "Nokia Settings" and verify that

the Folder where you installed your Flash Files are

in the "PRODUCT PATH TO SCAN" List...

 

FACTORY SET TO : Full Factory Set

OK

FACTORY SET TO : User Data

OK

FACTORY SET TO : Leave Factory

OK

FACTORY SET TO : Service Center

OK

FACTORY SET TO : Software Upgrade

OK

FACTORY SET TO : Production Tune

OK

لینک ارسال

بایگانی شده

این موضوع بایگانی و قفل شده و دیگر امکان ارسال پاسخ نیست.

×
×
  • اضافه کردن...