رفتن به مطلب
انجمن توسعه دهندگان موبایل

فلش/آنلاک و تعمیر موفقیت آمیز با باکس china miracle2 در این تاپیک


sfri.arash

ارسال های توصیه شده

حدف پترن gfive تبلت

>
Operation : Read Pattern/DP Lock [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 13 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 8801034E43617264201047D232568113
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0088 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E43617264201047D232568113
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E7400000
[eMMC] : FLASH_UCP : 3700 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ... 

Get Locks ...
PatternLock Sequnce : 741236589

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!

لینک ارسال
  • 1 سال بعد...

read pattern lenovo tab 3

>[font=IranSans]Operation : Read Pattern/DP Lock [ v1.58 ][/font]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey


Wait for phone...
Phone found! [ 40 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463832324D42001BEBE0C8C2BB
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [sAMSUNG] , BM228
[eMMC] : FLASH_CID : 150100463832324D42001BEBE0C8C2BB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0x3A926023AD6B3C4B3509A5CE08EA7542
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Reading data ... 


Get Locks ...
PatternLock Sequnce : 154789632


Done!
Elapsed: 00:00:15
Reconnect Power/Cable!


لینک ارسال

lenovo tab a3300 remove screen lock

>[font=IranSans]Operation : Clear UserLocks [Pin/Pwd/Pattern/FVLock/GoogleAcc] [ v1.58 ][/font]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey


Wait for phone...
Phone found! [ 40 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473264040504A2EBC222E1
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040504A2EBC222E1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x3A926023FAB3100EE5D414F1E9FA202F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


LSSDB Ok!
LSSWL Ok!
LSSSH Ok!
LSSKY Ok!
LSSGS Ok!
Security Settings : Clear Ok!


[info] : That feature NOT RESET "PRIVACY PASSWORD LOCK"! Use separate button!
[info] : That feature NOT RESET "FRP/GoogleLOCK"! Use separate "FRP" reset!
[info] : If phone stuck on "Logo" : 
1. Wait 2-3 minutes. Power Off phone by long press "Power" button
2. Power On phone again
3. Or wait up to 3-7 minutes, until phone start by itself
4. Also recommended reboot phone twice before start use it


Done!
Elapsed: 00:00:17
Reconnect Power/Cable!


لینک ارسال

y600 factory reset

>[font=IranSans]Operation : Format FileSystem [ v1.58 ][/font]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey


Wait for phone...
Phone found! [ 40 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040502A20BF72277
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040502A20BF72277
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x3A926023994C67D96FE2C4ED38A83DC7
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!




Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!


Done!
Elapsed: 00:00:25
Reconnect Power/Cable!


لینک ارسال
  • 1 ماه بعد...

repair security a3300hv without root

>[font=IranSans]Chinese Miracle II  [MTK module] v 1.58[/font]

Operation : Repair Security [ v1.58 ]


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey


Wait for phone...
Phone found! [ 78 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42015E92DC3391F9
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [sAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42015E92DC3391F9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x3A92602390C9E4BC309792C86E81DD58
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!






Set IMEI [00] : 865498029416120
Prepare finished. Security check required!


Wait for phone...
Phone found! [ 78 ]
Sync...
Repair done!


Done!
Elapsed: 00:00:35
Reconnect Power/Cable!


لینک ارسال
  • 5 هفته بعد...
>
Operation : Repair Security [ v1.58 ]


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey


Wait for phone...
Phone found! [ 49 ]
Sync...
Init Ok, waiting for phone ...
Reading initial info, wait... 
Phone Info : 
BB : MT6572, E01
HW : HUAQIN72_WE_B2A_GB3_HSPA_HW
SW : MOLY.WR8.W1315.MD.WG.MP.V4.P9
MM : 2000.00.00
VR : 1.0
Security Info : 
IMEI [1] : Damaged!
IMEI [2] : Damaged or not exists
Read Ok!
Update IMEI[1] to : 867170021332385 done!
Update IMEI[2] to : 867170021389054 done!


Done!
Elapsed: 00:00:51
Reconnect Power/Cable!


لینک ارسال
  • 3 ماه بعد...

qmobile j2

>
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019061344741270AA432532EB8E0
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GA
[eMMC] : FLASH_CID : 90014A484147346132A40A27E0B8B353
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID : 0xBB23AFA99DA7F1BF3037D38A80895059
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

لینک ارسال

بایگانی شده

این موضوع بایگانی و قفل شده و دیگر امکان ارسال پاسخ نیست.

×
×
  • اضافه کردن...