رفتن به مطلب
انجمن توسعه دهندگان موبایل

آخرین اخبار و بروزرسانی های XTC 2 Clip


sfri.arash

ارسال های توصیه شده

192.jpg

Short Description.

XTC 2 Clip is a specialized device for servicing HTC phones. With XTC 2 Clip you can Network Unlock, Repair IMEI, Repair CID, S-OFF many types of HTC Models

 

 

 

 

 

 

 

 

 

 

 

XTC 2 Clip

 

XTC 2 Clip is a specialized device for servicing HTC phones. It consists of a main device with a flex having a microsd emulator on its end.

 

 

Main Functions

 

 

  • Sim unlock or lock a phone to a specified network with your own unlock code
  • Repair IMEI (IMEI 2 for dual sim phones)
  • Repair CID (Country ID used for firmware region lock)
  • Repair MEID (for CDMA area phones)
  • Change security level (S-ON/S-OFF, allows you to run unsigned code, perform service actions, etc)
  • Many other functions you may need time-to-time.

 

 

 

Supported Models

XTC 2 Clip is to support the whole range of HTC phones, however the features may differ from model to model. Below is the list of tested models as per 1 May 2015:

 

 

  • HTC M9
    Butterfly
    Butterfly 2
    Desire 200
    Desire 300
    Desire 400 DualSim
    Desire 500 dualsim
    Desire 510
    Desire 526G+ dualsim
    Desire 600 dualsim
    Desire 601 Dualsim
    Desire 601 singlesim
    Desire 610 singlesim
    Desire 620 Dual
    Desire 700 Dual
    Desire 816 dual sim
    Desire 816 SingleSim
    Desire 816G
    Desire 820
    Desire 820 Dual sim 820u
    Desire 820 mini
    Desire 820s
    Desire 826w
    Desire C
    Desire Eye
    Desire SV
    Desire U dualsim
    Desire V
    Desire X
    Droid Verizon
    E8 SingleSim Sprint
    Nexus 9
    One
    One E8 dual
    One E8 M8Sx Red
    One J (KDDI Japan)
    One M7
    One M8 DualSim
    One M8 SingleSim
    One Max
    One Mini
    One Mini 2
    One Remix Verizon
    One S
    One SV
    One V
    One X
    One XL
    Rider 4G
    Sensation (Pyramid)
    Sensation XL (X315e)
    Vivid
    Legacy
    chacha
    vivo pvt
    saga
    bliss
    icon_g
    legend
    buzz
    vision
    ace pvt
    pico pvt
    pyramid pvt
    pyramid pg58130
    pyramid pg58100
    rider

 

 

How does it work?

In order to use its functions – you have to connect it to the SD card port of your phone. The SD port may be located on the left, right or rear (battery) part of your phone. If your phone has no SD port – you must use Y-cable.

193.jpg

 

Operation mode

There are 2 operation mode for XTC 2 Clip device:

 

direct – when the phone is in fastboot mode & connected to the PC, using the XTC 2 Clip software

offline – when using a SIM Lock menu of bootloader. To use the offline mode you must first save special service files on XTC 2 Clip device.

 

 

Direct mode

 

 

  • To use direct mode:
  • Insert XTC 2 Clip device into phone SD card slot, power on phone into bootloader mode using “vol-down + pwr” button. And select “FASTBOOT” option.
  • Connect phone to your PC.
  • Run the XTC 2 Clip software and select “Direct mode”.
  • Choose the desired operation and press corresponding button.
    SIM LOCK FUNCTION IS NOT AVAILABLE IN DIRECT MODE! PLEASE USE OFFLINE MODE FOR SIM LOCK MANAGEMENT.
     
    Important
     
    IF YOU GET A ‘SD CARD NOT FOUND’ MESSAGE – IT MEANS THAT THE XTC 2 CLIP WAS CONNECTED AFTER PHONE WAS POWERED ON. IN THIS CASE PRESS THE ‘REBOOT BOOTLOADER’ BUTTON AND REPEAT THE DESIRED OPERATION.
     
    194.jpg

 

 

Offline mode

 

 

  • How to prepare service files on XTC 2 Clip device:
  • Connect the XTC 2 Clip device to your PC using any compatible microsd card reader.
  • The device will be detected as a flash/disk drive.
  • Run the XTC 2 Clip software and select “SD editor” tab.
  • If you have previously had your service files on your device, please press “Read from drive” button, otherwise you will lose all your existing files once used the “Save to drive”.
  • Select the options you need and press “Save to drive”
  • Insert XTC 2 Clip device into phone SD card slot, power on phone into bootloader mode using “vol-down + pwr” button and select “SIMLOCK” option.
     
    Important
     
    THE SIM LOCK SETTINGS ARE BOUND TO THE PHONE’S IMEI. IN OTHER WORDS, IF YOU NEED TO LOCK/UNLOCK A PHONE, YOU MUST ADD PHONE’S IMEI TO SPECIAL ‘CONFIG.DAT’ FILE USING THE ‘SD EDITOR’ TAB.
     
    OTHERWISE YOU WILL GET ‘IMEI CHECKING FAIL’ AND YOUR PHONE WILL NOT BE UNLOCKED/LOCKED! CID, IMEI, SECURITY FLAG SETTINGS ARE NOT BOUND, YOU CAN USE IT ON AS MANY PHONES AS YOU WISH WITHOUT HAVING TO CONNECT THE DEVICE TO PC EACH TIME.
     
    195.jpg

 

 

Offline mode – manual files creation

It may happen that you need to create service files on a PC with no XTC 2 Clip software installed. In this case you can manually create the files for:

 

 

  • IMEI repair – imei.txt
  • Security level change – sf.txt
  • CID change – cid.txt

 

Please note, that unlike mentioned files, SIM lock configuration ‘config.dat’ is a binary file, and you may need to use a hex editor to create it. Therefore it’s recommended that you use an XTC 2 Clip software to create/manage this file.

TO CREATE/MODIFY THE FILES YOU CAN USE SIMPLE ‘NOTEPAD’ SOFTWARE

 

 

IMEI file

To modify the phone’s IMEI you need to create a text file called ‘imei.txt’ in the root folder of a XTC 2 Clipdevice disk drive. Once created, put inside a 14 digits of a new IMEI, for example: 12345678901234

 

 

SF file

To modify the phone’s security level (S-ON/S-OFF) you need to create a text file called ‘sf.txt’ in the root folder of a XTC 2 Clip device disk drive. Once created, put inside a number that corresponds to the desire security level:

 

 

  • 0 means security OFF (S-OFF)
  • 1 means (S-ON level 1)
  • 2 means (S-ON level 2)
  • 3 means (S-ON level 3, highest)

 

 

CID file

To modify the phone’s CID you need to create a text file called ‘cid.txt’ in the root folder of a XTC 2 Clip device disk drive. Once created, put inside a 8 symbols of a new CID, for example: HTC__001

 

A real friend is one who watch you face but see your heart

 

لینک ارسال
  • پاسخ 20
  • ایجاد شد
  • آخرین پاسخ

XTC2Tool version 1.04

 

- Added support for legacy phones (buzz,vision,icon,legend,saga,bliss,chacha,etc):

* Switch to modem mode

* Read phone information in modem mode

* S-OFF

* S-ON

* Repair IMEI

* Repair CID

* Unlock simlock

Please note that you must put the smartcard from XTC 2 Clip to phone's simcard slot before using these features.

 

- Added new eject function for safe removal of XTC 2 Clip in mass storage mode

- Added new terminal window for professionals - now you can issue manual commands without having to exit or minimize the software

- Improved reading information from phones

- Updated IMEI form, including checksum digit autocalculation with the possibility to manually replace it

- Added clear simlock commands for some Desire series

- Fixed bug with running adb/fastboot in folders with UTF names and special symbols

- Added web-site link and support forum link

- Minor bug fixes and improvements

 

Download: XTC 2 Clip

لینک ارسال
  • 2 هفته بعد...

XTC2Tool HOT version 1.05 has just been released with the following features:

 

- Added lock support for network subset, service provider, corporate

and SIM locks support - detection and UNLOCK for Legacy phones

- Added IMEI repair commands for QSC and SP phones, and phones with special IMEI repair handling

- Improved communication with the phone including Windows 8.x

- Added statusbar indication for communication commands

- Added "platform" and "product" fields to phone information

- Updated all drivers and communication libraries

- Autocheck for software updates

- Installer added

 

Discussion thread & more info

XTC 2 Tool 1.05 has been released [19.07.2015]

 

 

 

Direct download:

 

http://xtc2.net/downloads/xtc2tool_1.05_setup.exe

رفاقت کشکه و دوغ

لینک ارسال

Desire X/SV/C/V/U/200/300/500/600/One V/etc IMEI repair manual

 

Dear customers,

 

If your phone has no "writeimei" command in fastboot mode, here are the steps to repair IMEI (IMEI2):

 

- If your phone is not S-OFF, please make it S-OFF using the desired method (direct or SD (offline) mode)

- Connect your phone in fastboot mode

- Go to "Legacy" tab and press "Step 2. Switch to modem mode". WARNING! You must issue this command as a first command after phone was powered on!

If you will use any other command prior to switching to modem mode (e.g. read phone info, etc, it will fail in most cases)

- Wait for the phone to switch into modem mode (you may use the manual from here as well: Legacy phones manual(ace,buzz,vision,icon,legend,saga,bliss,chac ha,runnymede,kingdom))

- Perform IMEI or IMEI 2 repair

 

Please note you must use XYC 2 Clip Tool 1.06 or higher for this.

 

Thank you

A real friend is one who watch you face but see your heart

 

لینک ارسال

Dear customers,

 

XTC2Tool version 1.06:

 

- Desire X/SV/C/V/U/200/300/500/600/One V/etc IMEI/IMEI2 repair support (XTC2Clip exclusive and World First!) [Manual: Desire X/SV/C/V/U/200/300/500/600/One V/etc IMEI repair manual]

- Added support to repair IMEI 2 on dual-SIM legacy phones

- Added read option for IMEI 2 for legacy phones

- Added option to modify MCC-MNC code for sim-lock function:

* 2 digits MNC support

* 3 digits MNC support

- Added restart bootloader option for direct mode if sd is not detected

- IMEI / IMEI2 readed from the phone are now links to easily add them into offile simlock config

- Autoclick SPRD/QSC IMEI option if corresponding phone is detected

- SD editor tab is now less confusive

- Autoscroll terminal window (per customers request)

- Added description for security types in Direct mode and SD editor tabs (per customers request)

 

Please make sure to download latest drivers from our support page:

 

XTC 2 Clip

 

Direct download:

 

http://xtc2.net/downloads/xtc2tool_1.06_setup.exe

 

Previous releases:

 

XTC 2 Tool 1.05 has been released [19.07.2015]

XTC 2 Tool 1.04 has been released

رفاقت کشکه و دوغ

لینک ارسال
  • 1 ماه بعد...

XTC 2 Tool 1.10 has been released | Desire 626(s),HTV31 unlock and more 22.09.2015


Dear customers,

 

XTC2Tool version 1.10:

 

- Added Desire 626(s) Unlock (World first!)

- Added HTV31 (Japan) Unlock

- Improved connectivity in ADB/Fastboot mode

- Small bug fixes and improvements

 

Please make sure to download latest drivers from our support page:

 

XTC 2 Clip

 

Direct download:

http://xtc2.net/downloads/xtc2tool_1.10_setup.exe

 

Previous releases:

 

XTC 2 Tool 1.09 has been released | M9 Sprint easy sim unlock and more [28.08.2015]

XTC 2 Tool 1.08 has been released | World First easy HTL23 sim unlock [14.08.2015]

XTC 2 Tool 1.07 has been released | World First HTC Bootloader Unlock[07.08.2015]

XTC 2 Tool 1.06 has been released [27.07.2015]

XTC 2 Tool 1.05 has been released [19.07.2015]

XTC 2 Tool 1.04 has been released

هرچه کمتر نیازمند تحسین دیگران باشید بیشتر تحسین می شوید.

لینک ارسال
  • 1 ماه بعد...

Dear customers,

 

XTC2Tool version 1.14:

(this is a bugfix release)

 

- "Model not supported" on MTK phones during unlock/IMEI repair fix.

- Click on "Model ID" to search for corresponding flash file - corrected search url

 

XTC2Tool version 1.13:

 

- Finally! Access to our support server!

- Click on "Model ID" to search for corresponding flash file

- Click on "Product ID" to search for corresponding flash file

 

Please make sure to download latest drivers from our support page:

 

XTC 2 Clip

 

Direct download:

 

http://xtc2.net/downloads/latest/

 

Previous releases:

 

XTC 2 Tool 1.12 has been released | Exclusive: Universal Sprint unlock [08.10.2015]

XTC 2 Tool 1.10 has been released | Desire 626(s),HTV31 unlock and more [22.09.2015]

XTC 2 Tool 1.10 has been released | Desire 626(s),HTV31 unlock and more [22.09.2015]

XTC 2 Tool 1.09 has been released | M9 Sprint easy sim unlock and more [28.08.2015]

XTC 2 Tool 1.08 has been released | World First easy HTL23 sim unlock [14.08.2015]

XTC 2 Tool 1.07 has been released | World First HTC Bootloader Unlock[07.08.2015]

XTC 2 Tool 1.06 has been released [27.07.2015]

XTC 2 Tool 1.05 has been released [19.07.2015]

XTC 2 Tool 1.04 has been released

لینک ارسال
  • 4 هفته بعد...

XTC 2 Clip/Tool V1.15 Released | World First HTC A9 UNLOCK,Desire 520,E9s, FRP unlock, Many More!!!!

 

Finally a new HOT release: World First XTC 2 Tool version 1.15 for XTC 2 Clip!

 

XTC2Tool version 1.15:

 

- HTC One A9 - World First

Supported Features: SIM unlock, IMEI repair, S-OFF, SuperCID, etc!

 

- HTC Desire 520 - World First

Supported Features: SIM unlock A12_UL/0PGQ

 

- HTC E9s - World First

support versions : A50AML / 2PNL

 

- FRP-Locked Bootloaders - World First

Supported Features: FRP-locked bootloaders with automatic kill-switch lock removal (even for phones with no "OEM Unlocking" menu)!!!

 

- Added Google account / factory reset protection (FRP) removal option for ALL models

- Added support for HTC J One HTL22 (Japan) - SIM unlock / bootloader unlock support with user data preserve

- Added support for HTC Infobar A02 HTX21 (Japan) - SIM unlock / bootloader unlock support with user data preserve

 

- Added Developer options shortcut to Terminal page

 

- Updated manual for HTC J Butterfly HTV31 (Japan)

 

- M7 Sprint S-OFF notice added

 

- HTC HTV31 file not copied fix

 

- Added on-clip log for service operations

 

- Unlock tab is now named "Special Unlock / IMEI"

 

- Improved adb interface detection

 

- Small bug-fixed and improvements

 

- Improved setup process

- Something else we forgot to mention 3.gif

 

... more to come very soon 3.gif

 

Discussion Thread & More Info

XTC 2 Tool 1.15 has been released | WORLD FIRST A9 UNLOCK,Desire 520,E9s, FRP unlock.

A real friend is one who watch you face but see your heart

 

لینک ارسال
  • 1 ماه بعد...

XTC2Tool version 1.16:

 

- WORLD FIRST: Desire 526 (A13 - European) full support including sim-unlock

- Added "Easy flasher" option - no more command lines!

- Improved unlock algo including M9, A9, etc, now faster and better!

- Fixed HTV31 sim-unlock problem

- Minor improvements

 

Please make sure to download latest drivers from our support page:

 

XTC 2 Clip

 

Direct download:

 

http://xtc2.net/downloads/latest/

 

Mirror:

 

https://mega.nz/#!Pg8jzADK!zQIB2wedD...gwdkt_lCH3trfs

لینک ارسال
  • 4 هفته بعد...

 

TC 2 Tool 1.17 - M9e/728G support, bootloader unlock NO DATA LOSS +more

Dear customers,

 

First and massive release this year - welcome 2016

 

XTC2Tool version 1.17:

 

1. Worst first: Added support for HTC 728G Dual Sim (Unlock / IMEI repair / IMEI 2 repair) (S-OFF was already supported before)

2. World first: Added support for HTC M9e (Unlock / IMEI repair / IMEI 2 repair) (S-OFF was already supported before)

3. World first: Unlock bootloader for 2015-2016 HTC phones models with NO DATA LOSS!

4. World first: Lock bootloader (remove RELOCKED) for 2015-2016 HTC phones with no data loss - SAVE WARRANTY

5. Added support for HTC ISW13HT valente_wx (Japan market) - Unlock, Bootloader unlock (no data loss), Bootloader lock (save warranty), Remove "Tampered" (IMEI/S-OFF was supported before)

6. Added support for HTC J One HTL22 deluxe_j (Japan market) - Unlock, Bootloader unlock (no data loss), Bootloader lock (save warranty), Remove "Tampered" (IMEI/S-OFF was supported before)

7. Improved bootloader unlock for HTC 728G (new data format)

8. Improved FRP (Factory Reset Protection) UNLOCK and added support for all latest models

9. Added APN settings shortcut to Terminal menu

10. Fixed HTC Desire 520 0PGQ unlock support

11. Fixed HTC One J HTL22 (Japan market) unlock procedure

12. Fixed reboot into RUU mode from ADB mode

13. Fixed flashing from folders with international characters

14. Interface updates and improvements

 

More info and release thread is here:

 

XTC 2 Tool 1.17 has been released | World first M9e/728G support and MUCH MORE

 

لینک ارسال

بایگانی شده

این موضوع بایگانی و قفل شده و دیگر امکان ارسال پاسخ نیست.


×
×
  • اضافه کردن...