رفتن به مطلب
Shahrokhi_GSM

نسخه جدید CM2MT2 R.4 منتشر شد

پست های پیشنهاد شده

== CM2MT2 v2.00 r2 ==
MT6739 support, SPUnlock and more!

- Main
MT6739 CPU supported!
MT6739 moved from TEST to GENERAL support.
Firmwware read 
Firmware write
NVRAM read
NVRAM write
Reset Settings / Format FS
Reset FRP 
Reset Privacy
MemoryTool 

- MemoryTool 
Fixed PMT init on some devices 
Optimized Expand/Collapse view functions
Fixed DA1804 and DA1712 loaders support for WIPE
Optimized NAND support 

- Service
NVRAM module updated 
.dynamic page detection 
.some types support fixed
.repair security ( security type detection ) updated
FormatFS / Reset settings rebuild
.Activated fully automatic "FULL FACTORY" mode, designed for all modern devices ( include devices with SEC_CONTROL )
."FULL FACTORY" mode set to default
.Some "OLD" agents (DA15xx) may not work

- SP Unlock activated
Support all MTK modern phones, except MT6763 and MT6739. 
Read codes and Direct Unlock mode supported
MT6570 eMMC ONLY devices supported 

- Core 
Fixed memory leak issues and problems with booting on some systems
Optimized different OLD agents support for MODERN devices ( DA16xx and DA17xx line )
SW more faster now
EMI handler for MT6570 and MT6797 fully automated and complete
Improved EMI lookup support for MT675x devices
EMIDB updated
Hint/Error explain module updated
MT6758 support under test
MT6771 support under test

- Flasher
Fixed break issue, when just one file selected for flashing.
HWInfo compatibility status shown in log in both cases ( succes o failed ) 
- FW reader
MT6739 support
New types of firmwares supported
Optimized NAND reading on DA18xx line loaders
Read Firmware size now shown in log
- New models included
Limited MEIZU support
Limited Oppo support
Limited Gionee support
Limited BQ support
Some basic "generic" secure devices support optimized
Known issues/warnings/info : 
1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all. 
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format! 
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-Write data, which you want, ignore "EMPTY" states. 
4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر

استاد این نسخه قابلیت رید پترن و reset password  نداره درسته؟؟

من چک کردم نتونستم پیدا کنم.

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
در 2 ساعت قبل، mahdi2050 گفته است :

استاد این نسخه قابلیت رید پترن و reset password  نداره درسته؟؟

من چک کردم نتونستم پیدا کنم.

درود این نسخه فقط برای گوشی های secure هست و هنوز قابلیت read/reset رو پشتیبانی نمیکنه

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
== CM2MT2 v2.00 r4 ==
Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features !
 
- Main 
 Connection level revised
 BROM level support optimized
 
 MT6771 CPU supported!
 MT6771 moved from TEST to GENERAL support.
 Firmwware read
 Firmware write
 NVRAM read
 NVRAM write
 Reset Settings / Format FS
 Reset FRP
 Reset Privacy
 MemoryTool
 
- Service
 Repair Security revised. Fixed issues with some NV types.
 
- Core   
  EMIDB updated
  Hint/Error explain module updated 
  MT6758 support under test 
  MT6765 support under test
 
- FW reader 
  MT6771 supported
  New types of firmwares supported
  Scatter creation optimized 
  
- SP Unlock
  Revised unlock support for some models
  Info : MT6739/MT6763/MT6771 NOT supported YET!
 
- New models included
  Limited Oppo support (F7/A3)
  Limited Vivo support 
  And diffirent other models
  Some other basic "generic" secure devices support optimized
 
Known issues/warnings/info :
 1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
 In result you will give read/write FW errors and rest problems at all.
 Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
 2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
 3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
 Read-Write data, which you want, ignore "EMPTY" states.
 4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
 5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
 6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
 7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
 8. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version!
 If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!!
 Preloader info shown now during FW load.

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر

برای ارسال دیدگاه یک حساب کاربری ایجاد کنید یا وارد حساب خود شوید

برای اینکه بتوانید دیدگاهی ارسال کنید نیاز دارید که کاربر سایت شوید

ایجاد یک حساب کاربری

برای حساب کاربری جدید در سایت ما ثبت نام کنید. عضویت خیلی ساده است !

ثبت نام یک حساب کاربری جدید

ورود به حساب کاربری

دارای حساب کاربری هستید؟ از اینجا وارد شوید

ورود به حساب کاربری

×