رفتن به مطلب
انجمن توسعه دهندگان موبایل

در خواست ثبت نشده رو شبکه j500g


gebal

ارسال های توصیه شده


  BACKUP INSTRUCTIONS:
    Phone must be rooted!
  If the software can't root the phone automatically,
  then you must root your device manually.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Read EFS' button to read backup or 'Write EFS' to restore or
     press 'Write CERT' to restore certificates.
 
   To backup/restore QCN, phone diagnostic port must be enabled.
  1. Power on the phone.
  2. Type *#0808# and select 'DM+MODEM+ADB'.
  3. Type *#9090# and select 'DM/DUN over HSIC'.
     Or use 'Activate Diag' function from 'Repair' tab.
  4. Connect the phone to PC with USB cable, install drivers if needed.
  5. Select diagnostic port in port settings.
  6. Press 'Read QCN' button to read NV backup or 'Write QCN' to restore.

Operation: Write QCN
Selected model: SM-J500G
Selected port: COM4 USB Serial Port
Software version: 30.8

Reading QCN file... OK
Reading ID... error
No answer from phone

Done with Samsung Tool PRO v.30.8

لینک ارسال

No answer from phone

کد #0808#* رو بزنید و بزارید روی گزینهdm+modem+adb

com port گوشی رو پیدا کن

بعد رایت کن

این اروری که داری بخاطر نشناختن دستگاهه

Selected port: COM4 USB Serial Port این کامی که انتخاب کردی اشتباست

لینک ارسال

Reading QCN file... OK
Reading ID... OK
Detected ID: 00000FFE (MSM8916)
SW version: MPSS.DPM.2.0.2.c1.7-00020-M8936FAAAANUZM-1
Checking paths... OK
Restoring EFS backup... OK
Restoring NV items... OK
Restoring NV item SIM1... OK
Restoring NV item SIM2... OK
Restoring Provisioning Item Files... OK
Restore QCN done
Done with Samsung Tool PRO v.30.8

لینک ارسال

بایگانی شده

این موضوع بایگانی و قفل شده و دیگر امکان ارسال پاسخ نیست.

×
×
  • اضافه کردن...