رفتن به مطلب
Shahrokhi_GSD

داستان های موفقیت آمیز تعمیر با باکس SamSung Z3X

پست های پیشنهاد شده

در 3 ساعت قبل، webtar گفته است :

سلام خسته نباشید آیا c7000 توی ساپورت z3x برای ترمیم سریال هست ؟!
 

خیر نداره

Operation: Read Codes
Selected model: GT-S3600I
Selected port: COM6 Z3X BOX Serial Port, 460800
Software version: 30.5

Connect phone and press power button... Phone detected
Switching phone to TAT mode... OK
Reading phone info... OK
Phone version: S3600iJPIL1
CSC version: S3600iOJPIK3
IMEI: 35821303701110
Phone SN: RU6Z322536
Reading security... OK
Please wait, calculating codes... OK
Freeze code: 90532420
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
Multi lock: 00000000

Done with Samsung Tool PRO v.30.5

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Reset FRP UFS
Selected model: SM-G935F
Selected port: COM6 Z3X BOX Serial Port
Software version: 30.7
Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM4 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G935F)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Reset FRP UFS
Selected model: SM-G930S
Selected port: COM55 Z3X BOX Serial Port
Software version: 30.8

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM55 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G930S)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done
Done with Samsung Tool PRO v.30.8

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Reset FRP
Selected model: SM-G610F
Software version: 30.8

You must activate ADB before reset FRP  Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G610F
Android version: 7.0
Product code: 
Phone version: 
PDA version: G610FDDU1BQL9
CSC version: 
CSC country code: 
CSC sales code: 
HW version: 
Phone SN: 
Chip name: EXYNOS7870
Modem board: 
Security patch: 2017-08-01
RF cal date: 
IMEI: 
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.30.8

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Write CERT
Selected model: SM-J700H/DS
Software version: 30.8

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-A710F
Android version: 7.0
Product code: SM-J700HZKDEGY
Phone version: J700HXXU3BQC2
PDA version: J710FXXU3BQHA
CSC version: N920GXXU1DQAZ
CSC country code: India
CSC sales code: INS
HW version: MP 0.401
Phone SN: RF1HA00VAXE
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-08-01
RF cal date: 20161004
IMEI: 
Incorrect model selected. This may damage your phone. Continue?  Yes
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization AT RIL...
AT RIL stopped, restarting... OK
Checking for compatible phone and cert
Phone KEY ID: 0901
Checking certificate file... OK
KEY ID: 0901
Crypting CERT 1... OK
Crypting CERT 2... OK
Writing NV data... OK
Rebooting phone... OK
Write CERT done
Done with Samsung Tool PRO v.30.8

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر

Operation: Reset FRP/React/EE
Selected model: SM-J510GN
Software version: 30.8

Searching Samsung USB Flash interface... COM97 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.30.8

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر

Operation: Reset FRP
Selected model: SM-G610F
Software version: 30.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G610F
Android version: 7.0
Product code: SM-G610FZKDTHR
Phone version: G610FDDU1BQJ4
PDA version: G610FDDU1BQL9
CSC version: G610FOJV1BQL2
CSC country code: IRAN
CSC sales code: THR
HW version: MP 0.400
Phone SN: R28J82TM0BM
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-08-01
RF cal date: 20170821
IMEI: 352614091720088
Bypass FRP... OK

Done with Samsung Tool PRO v.30.2

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Write CERT
Selected model: GT-I9300
Software version: 30.8

Checking CERT file... OK
KEY ID: 0455
Waiting ADB device... OK
Reading phone info...
Model: GT-I9300
Android version: 4.3
Product code: GT-I9300OKDMID
Phone version: I9300XXUGNA8
PDA version: I9300XXUGPB1
CSC version: I9300OJVGPB1
CSC country code: Iraq
CSC sales code: MID
HW version: MP 1.600
Phone SN: RF1F61YXCME
Modem board: 
RF cal date: 2014.6.18
IMEI: 
Checking Super user right... true
Reading NV data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 0
Calculating... OK
Writing NV Data... OK
Rebooting phone... OK
Write CERT done
Done with Samsung Tool PRO v.30.8

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر

 

Operation: Reset FRP/React/EE
Selected model: SM-J120F
Software version: 30.8

Searching Samsung USB Flash interface... COM54 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.30.8

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Flash
Selected model: SM-J120F
Software version: 30.8

File analysis... OK
Total file size: 0x7D0670D4 (2000 Mb)
Searching USB Flash interface... COM54 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending param.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending modem.bin... OK
Sending cache.img... OK
Sending hidden.img... OK
Flashing done (time - 00:02:34)

Done with Samsung Tool PRO v.30.8

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Write CERT
Selected model: SM-J500F
Selected port: COM278 SAMSUNG Mobile USB Serial Port 
Software version: 30.8

Checking CERT file... OK
KEY ID: 0338
Waiting ADB device... OK
Reading phone info...
Model: SM-J500F
Android version: 6.0.1
Product code: SM-J500FZWDTHR
Phone version: J500FDDU1AOJ4
PDA version: J500FXXU1BQG9
CSC version: J500FOJV1BQG2
CSC country code: IRAN
CSC sales code: THR
HW version: MP 0.400
Phone SN: RV8HA1JKFJJ
Modem board: MSM8916
Security patch: 2017-08-01
RF cal date: 2016.10.28
IMEI: 
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... OK
Phone KEY ID: 0338
Writing CERT... OK
Checking CERT status... OK
Writing Slave CERT... OK
Checking Slave CERT status... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.30.8

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Write CERT
Selected model: GT-I9500
Software version: 30.8

Checking CERT file... OK
KEY ID: 0833
Waiting ADB device... OK
Reading phone info...
Model: GT-I9500
Android version: 5.0.1
Product code: Not Active
Phone version: I9500XXUEMJ8
PDA version: I9500XXUHOH6
CSC version: I9500OJVHOG3
CSC country code: IRAN
CSC sales code: THR
HW version: REV__
Phone SN: 
Modem board: XMM6360
RF cal date: Unknown
IMEI: 
Checking Super user right... true
Reading NV data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 0
Calculating... OK
Writing NV Data... OK
Rebooting phone... OK
Write CERT done
Done with Samsung Tool PRO v.30.8

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Write CERT
Selected model: SM-N910F
Selected port: COM6 Z3X BOX Serial Port
Software version: 30.9

Checking CERT file... OK
KEY ID: 0065
Waiting ADB device... OK
Reading phone info...
Model: SM-N910C
Android version: 6.0.1
Product code: 
Phone version: N910CXXU1DPC1
PDA version: N910CXXU2DPF6
CSC version: N910COJV2DPF1
CSC country code: UAE
CSC sales code: XSG
HW version: 
Phone SN: 
Modem board: DB7450R
Security patch: 2016-06-01
RF cal date: 1234.56.78
IMEI: 350050500009692
Incorrect model selected. This may damage your phone. Continue?  Yes
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... OK
Phone KEY ID: 0065
Writing CERT... OK
Checking CERT status... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.30.9

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
S3653 Write Flash
Selected model: S3653
Selected com port: COM55
Selected speed port: 921600
Search flash modem ... OK
Search flash modem on:COM274
Send APPS... OK
Send RC1... OK
Send RC2... OK
Send FFS... OK
Elapsed time: 196 second, sw ver: 3.5.0040
Done With 2G Tool Z3X

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر


  UNLOCK INSTRUCTIONS:
    To unlock NEW security type:
    Phone must be rooted!
  If the software can't root the phone automatically,
  then you must root your device manually.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
 
    To unlock OLD security type:
  1. Power on the phone.
  2. Connect the phone to PC with USB cable.
  3. Check Samsung modem in device manager, install drivers if needed.
  4. Press 'Unlock' button and select 'Unlock' for direct unlock.
 
    To read security codes (all security types):
  1. Power on the phone.
  2. Connect the phone to PC with USB cable.
  3. Check Samsung modem in device manager, install drivers if needed.
  4. Press 'Read codes' button to read security codes.
 
    To read security codes via diagnostic port:
  1. Power on the phone.
  2. Type *#0808# and select 'DM+MODEM+ADB'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Press 'Read Codes DIAG' button to read security codes.
 
    To reset Google account activation lock:
  1. ADB must be activated in any way (you can flash sBoot from combination firmware,
     make sure, that you are not upgrade sBoot).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Select device in ADB settings.
  4. Press 'Reset FRP' and follow the instructions in program.
  5. When process done, press 'Back' on phone and perform factory reset from phone settings.
    
   To reset Google account activation or Samsung reactivation lock:
  1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
  4. After phone reboot, go to settings and perform factory reset.

Operation: Unlock
Selected model: SM-J200F
Software version: 31.0

Waiting ADB device... OK
Reading phone info...
Model: SM-J200F
Android version: 5.1.1
Product code: SM-J200FTKEXSG
Phone version: J200FXXU3AQE1
PDA version: J200FXXU3AQE1
CSC version: J200FOJV3AQE1
CSC country code: UAE
CSC sales code: XSG
HW version: MP 0.300
Phone SN: RV8JC01ANFE
Chip name: EXYNOS3475
Modem board: SHANNON308
Security patch: 2017-05-01
RF cal date: 20171206
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID:  71 B0 82 1E C0 CD D0 0B 52 5C E2 4E 9D 86 E2 4D
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.31.0

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Reset FRP/React/EE
Selected model: SM-J200F
Software version: 31.0

Searching Samsung USB Flash interface... COM302 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.31.0

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Read Codes DIAG
Selected model: SM-J700F/DS
Software version: 31.1

Please wait, generating hash codes file, this can take few minutes... OK
Searching Samsung modem... detected COM356
Reading phone info... OK
Model: SM-J700F
AP version: J700FXXU4BRA1
CSC version: J700FOJV4BRA1
CP version: J700FXXU4BQC3
Product code: SM-J700FZKDXSG
Phone SN: RZ8H81G3D0K
Unique number: CAJ03A2A2EE7683
Searching Samsung diag port... detected COM355
Reading phone info... OK
CP version: J700FXXU4BQC3
CP build: Mar  3 2017 17:56:26
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON310
Checking NV data... OK
Please wait, calculating codes... OK (time - 00:00:07)
Freeze code: 17174819
NET lock: 08636273
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.31.1

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Read Codes
Selected model: SGH-C270
Selected port: COM6 Z3X BOX Serial Port, 921600
Software version: 31.1

Connect phone, press power button
Waiting phone... OK
Sending PRELOADER... OK
Flash ID: 54 (K5N6433ATM_TOP_Boot)
Sending LOADER... OK
Checking LOADER... OK
Reading FLASH... OK
Phone version: C270JPIL1
HW version: MP 0.200
Phone BT: 00:12:47:00:00:01
IMEI: 353952045642423
Please wait, calculating codes... OK
Freeze code: 82873660
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
Multi lock: 00000000
Done with Samsung Tool PRO v.31.1

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Unlock
Selected model: SM-G925F
Selected port: COM6 Z3X BOX Serial Port
Software version: 31.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G955F
Android version: 7.0
PDA version: G925FXXU1ARC1
CSC version: G925FOWT1ARC1
Phone version: G925FXXU6ERCA
Product code: SM-G925FZKEEVR
CSC country code: VIETNAM
CSC sales code: XXV
Phone SN: 00000000000
IMEI: 359522060518883
HW version: MP 0.600
RF cal date: 20150503
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2018-03-01
Incorrect model selected. This may damage your phone. Continue?  Yes
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID:  88 CC A4 EF 76 06 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.31.2

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
Operation: Reset FRP
Selected model: SM-G532F
Software version: 31.5.1

You must activate ADB before reset FRP  Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G532F
Android version: 6.0.1
PDA version: G532FXWU1APJ1
CSC version: 
Phone version: G532FXXU1APK4
Product code: SM-G532FZKD
CSC country code: 
CSC sales code: 
Phone SN: R58J313E6BW
IMEI: 357621086xxxxxx
HW version: MP 0.300
RF cal date: 20170307
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2016-10-01
Boot Warranty bit: 0
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.31.5.1

 

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر

Operation: Unlock
Selected model: SM-J700F
Software version: 32.7

Waiting ADB device... OK
Reading phone info...
Model: SM-J700F
Android version: 6.0.1
PDA version: J700FXXU3BPJ1
CSC version: J700FOJV3BPJ1
Phone version: J700FXXU3BPJ1
Product code: SM-J700FZDDXSG
CSC country code: UAE
CSC sales code: XSG
Phone SN: RZ8H70DCFEK
IMEI: 3523--------------25540
HW version: MP 0.701
RF cal date: 20160706
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2016-10-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.32.7

با کمک داداش رضا ی گل reza_1234

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر
در در 23 بهمن 1396 در 12:43، webtar گفته است :

سلام خسته نباشید آیا c7000 توی ساپورت z3x برای ترمیم سریال هست ؟!
 

خیر
پشتیبانی نمیشه !

به اشتراک گذاری این ارسال


لینک به ارسال
به اشتراک گذاری در سایت های دیگر

برای ارسال دیدگاه یک حساب کاربری ایجاد کنید یا وارد حساب خود شوید

برای اینکه بتوانید دیدگاهی ارسال کنید نیاز دارید که کاربر سایت شوید

ایجاد یک حساب کاربری

برای حساب کاربری جدید در سایت ما ثبت نام کنید. عضویت خیلی ساده است !

ثبت نام یک حساب کاربری جدید

ورود به حساب کاربری

دارای حساب کاربری هستید؟ از اینجا وارد شوید

ورود به حساب کاربری

×