رفتن به مطلب
انجمن توسعه دهندگان موبایل

داستان های موفقیت آمیز تعمیر با باکس SamSung Z3X


علیرضا شاهرخی

ارسال های توصیه شده

Operation: Reset FRP/React/EE
Selected model: SM-J510GN
Software version: 30.8

Searching Samsung USB Flash interface... COM97 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.30.8

[sIGPIC][/sIGPIC]

لینک ارسال
  • پاسخ 49
  • ایجاد شد
  • آخرین پاسخ

Operation: Reset FRP
Selected model: SM-G610F
Software version: 30.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G610F
Android version: 7.0
Product code: SM-G610FZKDTHR
Phone version: G610FDDU1BQJ4
PDA version: G610FDDU1BQL9
CSC version: G610FOJV1BQL2
CSC country code: IRAN
CSC sales code: THR
HW version: MP 0.400
Phone SN: R28J82TM0BM
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-08-01
RF cal date: 20170821
IMEI: 352614091720088
Bypass FRP... OK

Done with Samsung Tool PRO v.30.2

لینک ارسال
Operation: Write CERT
Selected model: GT-I9300
Software version: 30.8

Checking CERT file... OK
KEY ID: 0455
Waiting ADB device... OK
Reading phone info...
Model: GT-I9300
Android version: 4.3
Product code: GT-I9300OKDMID
Phone version: I9300XXUGNA8
PDA version: I9300XXUGPB1
CSC version: I9300OJVGPB1
CSC country code: Iraq
CSC sales code: MID
HW version: MP 1.600
Phone SN: RF1F61YXCME
Modem board: 
RF cal date: 2014.6.18
IMEI: 
Checking Super user right... true
Reading NV data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 0
Calculating... OK
Writing NV Data... OK
Rebooting phone... OK
Write CERT done
Done with Samsung Tool PRO v.30.8

 

لینک ارسال

 

Operation: Reset FRP/React/EE
Selected model: SM-J120F
Software version: 30.8

Searching Samsung USB Flash interface... COM54 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.30.8

 

لینک ارسال
Operation: Flash
Selected model: SM-J120F
Software version: 30.8

File analysis... OK
Total file size: 0x7D0670D4 (2000 Mb)
Searching USB Flash interface... COM54 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending param.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending modem.bin... OK
Sending cache.img... OK
Sending hidden.img... OK
Flashing done (time - 00:02:34)

Done with Samsung Tool PRO v.30.8

 

لینک ارسال
Operation: Write CERT
Selected model: SM-J500F
Selected port: COM278 SAMSUNG Mobile USB Serial Port 
Software version: 30.8

Checking CERT file... OK
KEY ID: 0338
Waiting ADB device... OK
Reading phone info...
Model: SM-J500F
Android version: 6.0.1
Product code: SM-J500FZWDTHR
Phone version: J500FDDU1AOJ4
PDA version: J500FXXU1BQG9
CSC version: J500FOJV1BQG2
CSC country code: IRAN
CSC sales code: THR
HW version: MP 0.400
Phone SN: RV8HA1JKFJJ
Modem board: MSM8916
Security patch: 2017-08-01
RF cal date: 2016.10.28
IMEI: 
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... OK
Phone KEY ID: 0338
Writing CERT... OK
Checking CERT status... OK
Writing Slave CERT... OK
Checking Slave CERT status... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.30.8

 

لینک ارسال
Operation: Write CERT
Selected model: GT-I9500
Software version: 30.8

Checking CERT file... OK
KEY ID: 0833
Waiting ADB device... OK
Reading phone info...
Model: GT-I9500
Android version: 5.0.1
Product code: Not Active
Phone version: I9500XXUEMJ8
PDA version: I9500XXUHOH6
CSC version: I9500OJVHOG3
CSC country code: IRAN
CSC sales code: THR
HW version: REV__
Phone SN: 
Modem board: XMM6360
RF cal date: Unknown
IMEI: 
Checking Super user right... true
Reading NV data... OK
Checking magic... OK
Running zTool, please wait... OK
Detected new type of security version 0
Calculating... OK
Writing NV Data... OK
Rebooting phone... OK
Write CERT done
Done with Samsung Tool PRO v.30.8

 

لینک ارسال
Operation: Write CERT
Selected model: SM-N910F
Selected port: COM6 Z3X BOX Serial Port
Software version: 30.9

Checking CERT file... OK
KEY ID: 0065
Waiting ADB device... OK
Reading phone info...
Model: SM-N910C
Android version: 6.0.1
Product code: 
Phone version: N910CXXU1DPC1
PDA version: N910CXXU2DPF6
CSC version: N910COJV2DPF1
CSC country code: UAE
CSC sales code: XSG
HW version: 
Phone SN: 
Modem board: DB7450R
Security patch: 2016-06-01
RF cal date: 1234.56.78
IMEI: 350050500009692
Incorrect model selected. This may damage your phone. Continue?  Yes
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... OK
Phone KEY ID: 0065
Writing CERT... OK
Checking CERT status... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.30.9

 

لینک ارسال
S3653 Write Flash
Selected model: S3653
Selected com port: COM55
Selected speed port: 921600
Search flash modem ... OK
Search flash modem on:COM274
Send APPS... OK
Send RC1... OK
Send RC2... OK
Send FFS... OK
Elapsed time: 196 second, sw ver: 3.5.0040
Done With 2G Tool Z3X

 

لینک ارسال
  • 3 هفته بعد...


  UNLOCK INSTRUCTIONS:
    To unlock NEW security type:
    Phone must be rooted!
  If the software can't root the phone automatically,
  then you must root your device manually.
  1. Power on the phone.
  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
     go to 'Settings'-'Developer options' and enable 'USB debugging'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Select device in ADB settings.
  5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
 
    To unlock OLD security type:
  1. Power on the phone.
  2. Connect the phone to PC with USB cable.
  3. Check Samsung modem in device manager, install drivers if needed.
  4. Press 'Unlock' button and select 'Unlock' for direct unlock.
 
    To read security codes (all security types):
  1. Power on the phone.
  2. Connect the phone to PC with USB cable.
  3. Check Samsung modem in device manager, install drivers if needed.
  4. Press 'Read codes' button to read security codes.
 
    To read security codes via diagnostic port:
  1. Power on the phone.
  2. Type *#0808# and select 'DM+MODEM+ADB'.
  3. Connect the phone to PC with USB cable, install drivers if needed.
  4. Press 'Read Codes DIAG' button to read security codes.
 
    To reset Google account activation lock:
  1. ADB must be activated in any way (you can flash sBoot from combination firmware,
     make sure, that you are not upgrade sBoot).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Select device in ADB settings.
  4. Press 'Reset FRP' and follow the instructions in program.
  5. When process done, press 'Back' on phone and perform factory reset from phone settings.
    
   To reset Google account activation or Samsung reactivation lock:
  1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
  2. Connect the phone to PC with USB cable, install drivers if needed.
  3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
  4. After phone reboot, go to settings and perform factory reset.

Operation: Unlock
Selected model: SM-J200F
Software version: 31.0

Waiting ADB device... OK
Reading phone info...
Model: SM-J200F
Android version: 5.1.1
Product code: SM-J200FTKEXSG
Phone version: J200FXXU3AQE1
PDA version: J200FXXU3AQE1
CSC version: J200FOJV3AQE1
CSC country code: UAE
CSC sales code: XSG
HW version: MP 0.300
Phone SN: RV8JC01ANFE
Chip name: EXYNOS3475
Modem board: SHANNON308
Security patch: 2017-05-01
RF cal date: 20171206
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID:  71 B0 82 1E C0 CD D0 0B 52 5C E2 4E 9D 86 E2 4D
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.31.0

[sIGPIC][/sIGPIC]

لینک ارسال

بایگانی شده

این موضوع بایگانی و قفل شده و دیگر امکان ارسال پاسخ نیست.


×
×
  • اضافه کردن...