رفتن به مطلب
انجمن توسعه دهندگان موبایل

داستان های موفقیت آمیز تعمیر با باکس SamSung Z3X


علیرضا شاهرخی

ارسال های توصیه شده

Operation: Write CERT
Selected model: SM-J500F
Selected port: COM117 SAMSUNG Mobile USB Serial Port 
Software version: 30.5

Checking CERT file... OK
KEY ID: 0338
Waiting ADB device... OK
Reading phone info...
Model: SM-J500F
Android version: 5.1.1
Product code: SM2J500FZWDXSG
Phone version: J500FXXU1AOH1
PDA version: J500FXXU1AOH2
CSC version: J500FOJV1AOG5
CSC country code: UAE
CSC sales code: XSG
HW version: MP 0.400
Phone SN: RV8H31D01LE
Modem board: MSM8916
RF cal date: 2016.03.26
IMEI: 
Writing AT RIL... OK
Initialization AT RIL... OK
Bypass MSL... OK
Checking for compatible phone and cert... OK
Phone KEY ID: 0338
Writing CERT... OK
Checking CERT status... OK
Writing Slave CERT... OK
Checking Slave CERT status... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.30.5

 

لینک ارسال
  • پاسخ 49
  • ایجاد شد
  • آخرین پاسخ

Operation: Repair
Selected model: SM-J701F
Software version: 30.5

If you are looking for 'Repair Network' function then you should use 'Patch Certificate'

Waiting ADB device... OK
Reading phone info...
Model: SM-J701F
Android version: 7.0
Product code: SM-J701FZSDMID
Phone version: J701FXXU1AQI1
PDA version: J701FXXU1AQI1
CSC version: J701FOJV1AQI3
CSC country code: Iraq
CSC sales code: MID
HW version: MP 0.400
Phone SN: RF8JA2GTSXM
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-08-01
RF cal date: 20171020
IMEI: 
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Rebooting phone... OK
Waiting ADB device... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data... OK
HWID:  B7 7B FF 6E 94 A2 75 51 51 19 0E 63 F0 DA 30 00
Calculating... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool PRO v.30.5
Operation: Patch Certificate
Selected model: SM-J701F
Software version: 30.5

Waiting ADB device... OK
Reading phone info...
Model: SM-J701F
Android version: 7.0
Product code: SM-J701FZSDMID
Phone version: J701FXXU1AQI1
PDA version: J701FXXU1AQI1
CSC version: J701FOJV1AQI3
CSC country code: Iraq
CSC sales code: MID
HW version: MP 0.400
Phone SN: RF8JA2GTSXM
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-08-01
RF cal date: 20171020
IMEI: 
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.30.5

 

لینک ارسال
Operation: Patch Certificate
Selected model: SM-J111F
Software version: 30.7

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-J111F
Android version: 5.1.1
Product code: SM-J111FZKDTHR
Phone version: J111FXXU0API3
PDA version: J111FXXU0APJ3
CSC version: J111FOJV0APJ3
CSC country code: IRAN
CSC sales code: THR
HW version: MP 0.200
Phone SN: RV8J718QTGP
Modem board: SC9830i
Security patch: 2016-10-01
RF cal date: 2017.07.24
IMEI: 
Checking Super user right... true
Reading data from phone... OK
Patching CERT check... OK
Writing data to phone... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.30.7

 

لینک ارسال
Operation: Reset FRP UFS
Selected model: SM-N920C
Selected port: COM6 Z3X BOX Serial Port
Software version: 30.7

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM6 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (N920C)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done
Done with Samsung Tool PRO v.30.7

 

لینک ارسال
در در 1 آذر 1396 در 17:54، Shahrokhi_GSD گفته است :

درود به کلیه کاربران و همکاران عزیز

لطفا تمامی لاگ ها در این تاپیک ارائه شود

سلام خسته نباشید آیا c7000 توی ساپورت z3x برای ترمیم سریال هست ؟!
 

مرکز تخصصی جی اس ام پلاس

لینک ارسال
در 3 ساعت قبل، webtar گفته است :

سلام خسته نباشید آیا c7000 توی ساپورت z3x برای ترمیم سریال هست ؟!
 

خیر نداره

Operation: Read Codes
Selected model: GT-S3600I
Selected port: COM6 Z3X BOX Serial Port, 460800
Software version: 30.5

Connect phone and press power button... Phone detected
Switching phone to TAT mode... OK
Reading phone info... OK
Phone version: S3600iJPIL1
CSC version: S3600iOJPIK3
IMEI: 35821303701110
Phone SN: RU6Z322536
Reading security... OK
Please wait, calculating codes... OK
Freeze code: 90532420
NET lock: 00000000
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
Multi lock: 00000000

Done with Samsung Tool PRO v.30.5

 

لینک ارسال
Operation: Reset FRP UFS
Selected model: SM-G935F
Selected port: COM6 Z3X BOX Serial Port
Software version: 30.7
Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM4 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G935F)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done

 

لینک ارسال
Operation: Reset FRP UFS
Selected model: SM-G930S
Selected port: COM55 Z3X BOX Serial Port
Software version: 30.8

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM55 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G930S)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done
Done with Samsung Tool PRO v.30.8

 

لینک ارسال
Operation: Reset FRP
Selected model: SM-G610F
Software version: 30.8

You must activate ADB before reset FRP  Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA  Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G610F
Android version: 7.0
Product code: 
Phone version: 
PDA version: G610FDDU1BQL9
CSC version: 
CSC country code: 
CSC sales code: 
HW version: 
Phone SN: 
Chip name: EXYNOS7870
Modem board: 
Security patch: 2017-08-01
RF cal date: 
IMEI: 
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.30.8

 

لینک ارسال
Operation: Write CERT
Selected model: SM-J700H/DS
Software version: 30.8

Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-A710F
Android version: 7.0
Product code: SM-J700HZKDEGY
Phone version: J700HXXU3BQC2
PDA version: J710FXXU3BQHA
CSC version: N920GXXU1DQAZ
CSC country code: India
CSC sales code: INS
HW version: MP 0.401
Phone SN: RF1HA00VAXE
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-08-01
RF cal date: 20161004
IMEI: 
Incorrect model selected. This may damage your phone. Continue?  Yes
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization AT RIL...
AT RIL stopped, restarting... OK
Checking for compatible phone and cert
Phone KEY ID: 0901
Checking certificate file... OK
KEY ID: 0901
Crypting CERT 1... OK
Crypting CERT 2... OK
Writing NV data... OK
Rebooting phone... OK
Write CERT done
Done with Samsung Tool PRO v.30.8

 

لینک ارسال

بایگانی شده

این موضوع بایگانی و قفل شده و دیگر امکان ارسال پاسخ نیست.


×
×
  • اضافه کردن...